This is 30 liter case - dimensions ~ 30x25x40cm
specs:
i5 7500 (i know i should use celeron) but i bought whole set (mobo cpu ram for cheap)
8gb ram
msi b250m pro-vd + 2x pci-e expander 4x riserUSB
660W seasonic platinum
custom cables 2x (EPS 8pin @ 4x riser)
3x 120mm corsair 0,25A fan (@ 5V) very silent (even for 7V) - I can sleep 50cm of it - no problem) - also perfect for cat ppl - lol (top of case about 30*C)
8x 1050ti (7x kalmx + 1x zotac - i have 8x kalmx but i have probably damaged riser - when i plug stormx or kalmx gpu in there - no boot and squeeky noise from riser - with zotac no problem) - it will be replaced after I made panels
total power consumption 470W @ mining ETH
I know, I know - You will say - this is OVEN - NO SPACE GPU - WROOOONG - NO - I made project especially for 1050ti - each consumpt about 56-58W - temps are low - sth about 50/50/55/55/65/55/50/50*C (this 65*C is probably middle card in "dead zone" of fan but work OK)
- TO DO LIST:
- front panel/other side panel
- expander @ riser to prevent stick out of case (or resolder USB connectors for angled ones)
- PS (i have next project coming soon) - 30liters as well but maybe i can fit 12 gpu
specs:
i5 7500 (i know i should use celeron) but i bought whole set (mobo cpu ram for cheap)
8gb ram
msi b250m pro-vd + 2x pci-e expander 4x riserUSB
660W seasonic platinum
custom cables 2x (EPS 8pin @ 4x riser)
3x 120mm corsair 0,25A fan (@ 5V) very silent (even for 7V) - I can sleep 50cm of it - no problem) - also perfect for cat ppl - lol (top of case about 30*C)
8x 1050ti (7x kalmx + 1x zotac - i have 8x kalmx but i have probably damaged riser - when i plug stormx or kalmx gpu in there - no boot and squeeky noise from riser - with zotac no problem) - it will be replaced after I made panels
total power consumption 470W @ mining ETH
I know, I know - You will say - this is OVEN - NO SPACE GPU - WROOOONG - NO - I made project especially for 1050ti - each consumpt about 56-58W - temps are low - sth about 50/50/55/55/65/55/50/50*C (this 65*C is probably middle card in "dead zone" of fan but work OK)
- TO DO LIST:
- front panel/other side panel
- expander @ riser to prevent stick out of case (or resolder USB connectors for angled ones)
- PS (i have next project coming soon) - 30liters as well but maybe i can fit 12 gpu
Last edited: