Over the last few weeks i have been playing around with the idea of a shortened Sugo SG13, with an AP181.
I eventually decided to make a case out of 19mm:
Key features:
2x SSD support
Motherboard and gpu just sit straight on top of ssds
PSU is screwed into the top.
3/4 front view.
---------------------------------------------------------------------------------------------
Now onto the build!
This is after i've inserted the power button and routed the bottom out. I've also wood stained all the wooden parts.
Test fitting the fan and the lid
I eventually decided to make a case out of 19mm:
Key features:
- Supports Graphics up to 170mm long
- Supports Sfx/SFX-L psu's.
- No front panel usb/sound
- Supports 2x 2.5mm cards
- External volume: 10L (sugo 13 = 11.29L)
- Internal volume: 7L~
2x SSD support
Motherboard and gpu just sit straight on top of ssds
PSU is screwed into the top.
3/4 front view.
---------------------------------------------------------------------------------------------
Now onto the build!
This is after i've inserted the power button and routed the bottom out. I've also wood stained all the wooden parts.
Test fitting the fan and the lid