since i am most likely selling or giving some of my parts of ophion 7 project i got new case from ebay.
this case is from futro s720 pc.
parts gotten:
s720 case
inner usable dimensions ~48x175x248= 2.08l
akasa alucia h4i (fins chopped shorter from another side by pliers)
asus h410t2-csm thin itx
(needs this type of motherboard with less usb ports
at back to have room for gan holder)
kingston 2666mhz 2x16 ddr4
i5 150505 (need to confirm if i get to bios again)
old ssds will be re-used
m.2 to pcie 15x adapter from delock
used rtx a2000 to be modded with heatsink,
for testing old hd6450 and lp 1050
hdplex 250w gan.
need adapters to get m.2 ssds hooked to motherboard.
hopefully next week or so i get to try out if motherboard,
gan 250w and m.2 16x adapter have survived the modding.
old heatsink screws used as shoulder screws for now.
here some photos of project so far.
this case is from futro s720 pc.
parts gotten:
s720 case
inner usable dimensions ~48x175x248= 2.08l
akasa alucia h4i (fins chopped shorter from another side by pliers)
asus h410t2-csm thin itx
(needs this type of motherboard with less usb ports
at back to have room for gan holder)
kingston 2666mhz 2x16 ddr4
i5 150505 (need to confirm if i get to bios again)
old ssds will be re-used
m.2 to pcie 15x adapter from delock
used rtx a2000 to be modded with heatsink,
for testing old hd6450 and lp 1050
hdplex 250w gan.
need adapters to get m.2 ssds hooked to motherboard.
hopefully next week or so i get to try out if motherboard,
gan 250w and m.2 16x adapter have survived the modding.
old heatsink screws used as shoulder screws for now.
here some photos of project so far.
