NFC S4 Mini #77 - Orangulan Brickless S4

[Kmpkt]

https://www.digikey.ca/products/en/...t=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

There's quite a few and they're dirt cheap. You can find the cables on Digi-key as well. If you search "Male C8" you should be able to find the inlet easily on eBay too.

 

[gunpalcyril]

Thanks Kmpkt. I got the parts, cut and soldered the wires, and I was able to attach the socket to a spare bracket (I'll be using a single slot gpu, p600).

 

[Kmpkt]

Really nice solution. I had considered chopping the GPU like that but decided I'd rather cut the case than the GPU in my situation. Hope you're happy with the mod when you're done : )

 

[Ceros_X]

Thanks Kmpkt. I got the parts, cut and soldered the wires, and I was able to attach the socket to a spare bracket (I'll be using a single slot gpu, p600).

That looks really nice and professional!

 

[gunpalcyril]

@Kmpkt I'll post a quick update to show how it looks, I'm glad I came upon your post for the idea.

@Ceros_X Thanks, hopefully when I finish the build it will look clean and tidy as this mod.

 

[LeandroJVarini]

Thanks for sharing your ideas, I give you lots of ideas for my next project!