Sorry for the double post, photos for reference...
@Comradebuttons you should refer to this video done by Thorzone (so trustworthy info), it is with the prototype but hopefully it should not be different and will show you how to prebent the cables :
What about our trustworthy friend fan grill? Or swap fans with the undermobo one (I dont know if it allows a full size fan though), assuming some performance lossSorry for the double post, photos for reference...
@AlexTzone If the reply from UPS is not positive, what is the so-called "other" option?
im not understanding this vertical placed fan...feels weirdSorry for the double post, photos for reference...
And
AIO cables holding in the CPU power cables and pump/fan cables
PSU and bending of cables to make it work
GPU side and extra slack being held in the mobo power cable
My take on your scenario: You need a slim fan as well above the radiator and then spend a lot of tie bending the cables correctly. You need to route the cables *between* your tubes, not behind them. Could you make this work with the regular-sized fan? Maybe. Is it worth the hassle? Probably not.
Other photos in case there are some helpful for you: https://drive.google.com/drive/folders/1yLFYYz2K0lbkV-u8ivEWrdZzcSvJmUK4?usp=sharing
Hello! I was able to make it work with. a slim fan on the AIO (Corsair h60) AND the fan slot, and some struggle cable management. (Also my PSU is a corsair SF750) Basically:Sorry for the double post, photos for reference...
- Insert the AIO first
- Install the GPU LAST! so that you can pull cables tight to the back where there's extra slack
- Run all of the cables between the two aio tubes so that the tube pushes the cables *inside* the case
- If cables have extra slack (i.e. Motherboard connector), pull the entire cable to the back of the case (GPU side) before inserting the PSU.
- When inserting the PSU, make sure all cables are bent to point *inside* the case
- Pull all cables with extra length towards the GPU side after inserting the PSU to make sure they don't fall in the fan blades
- Use velcro ties if needed to hold them in place
AIO cables holding in the CPU power cables and pump/fan cables
PSU and bending of cables to make it work
GPU side and extra slack being held in the mobo power cable
My take on your scenario: You need a slim fan as well above the radiator and then spend a lot of tie bending the cables correctly. You need to route the cables *between* your tubes, not behind them. Could you make this work with the regular-sized fan? Maybe. Is it worth the hassle? Probably not.
Other photos in case there are some helpful for you: https://drive.google.com/drive/folders/1yLFYYz2K0lbkV-u8ivEWrdZzcSvJmUK4?usp=sharing
AlexTzone
I design minimalistic – but not boring – PC stuff
Original poster
THOR ZONE
Silver Supporter
@Comradebuttons
Flipping the PSU upside down, installing the 120x25mm fan AFTER inserting the AIO helped me install a Corsair H55. H60 is harder because of the tubing but should work?
You also have to flatten the cables as much as possible
Flipping the PSU upside down, installing the 120x25mm fan AFTER inserting the AIO helped me install a Corsair H55. H60 is harder because of the tubing but should work?
You also have to flatten the cables as much as possible
AlexTzone
I design minimalistic – but not boring – PC stuff
Original poster
THOR ZONE
Silver Supporter
Send them to freight forwarder, who in turns ships them through one of their solutions (includes the big carriers).
AlexTzone
I design minimalistic – but not boring – PC stuff
Original poster
THOR ZONE
Silver Supporter
Also, while we wait...we've drafted an addon some will love and others will hate 
However, like with the rest of the case, perhaps we can fine tune it together 
Posting pics later today or tomorrow!
However, like with the rest of the case, perhaps we can fine tune it together Posting pics later today or tomorrow!
AlexTzone
I design minimalistic – but not boring – PC stuff
Original poster
THOR ZONE
Silver Supporter
Unfortunately not because:
- Steel production is waiting for backup fasteners to arrive in order to be completed (I explained this a couple of times if you check a page or two back)
- Once backup fasteners arrive it will take 1-2 days to finish
- Other than US, CA, JP, CN, TW and HK we still need to wait for UPS reply regarding AU, KR and EU.
I like this scene the most.
A full gear porn.
It's like Iron Man 1 suit scene.
When can I buy the aio with the Thorzone logo printed on it? Will it be considered with the gen4 card after the delivery is completed?
Last edited:
Ooooh wonder what it is. Very curious.Also, while we wait...we've drafted an addon some will love and others will hate
Posting pics later today or tomorrow!
AlexTzone
I design minimalistic – but not boring – PC stuff
Original poster
THOR ZONE
Silver Supporter
PRESENTING — THE DOCK
- Vertical MJOLNIR stand
- USB-C
- Front power button
Not sure which two-tone is best for Stealth, Dark and Steel respectively so feel free to let me know. Also tested have it as 1-tone but that looked really boring.
- Vertical MJOLNIR stand
- USB-C
- Front power button
Not sure which two-tone is best for Stealth, Dark and Steel respectively so feel free to let me know. Also tested have it as 1-tone but that looked really boring.
Last edited:
That's even better that what i would have ever imaginedPRESENTING — THE DOCK
- Vertical MJOLNIR stand
- USB-C
- Front power button
Not sure which two-tone is best for Stealth, Dark and Steel respectively so feel free to let me know. Also tested have it as 1-tone but that looked really boring.
Is it on the front side or AIO side?
@AlexTzone Looks nice, Will the USB-C port being in the valley impose any restriction on the device side whether it can actually slot in between the two shoulders? Is there a way the port to be on the actual vertical base, perhaps flush with the surface so that it isn't too intrusive either?
Also would like to see the 180 degree rotation to see what you have in mind for cable management.
Lastly, steel looks best with either but perhaps the darkest one looks nice?
Also would like to see the 180 degree rotation to see what you have in mind for cable management.
Lastly, steel looks best with either
but perhaps the darkest one looks nice?
PRESENTING — THE DOCK
- Vertical MJOLNIR stand
- USB-C
- Front power button
Not sure which two-tone is best for Stealth, Dark and Steel respectively so feel free to let me know. Also tested have it as 1-tone but that looked really boring.
I think it would be cool if the rgb shines slightly through the gap in the connection.
It may be a disadvantageous structure for the Blower design graphic card.
Please consider the shortcomings of the design that completely covers the lower part.
You can refer to the great design in the futuristic furniture.
The current design may vary in color depending on the batch.
Consider neutral designs such as chrome feet.
Or we should study neutral color combinations that don't matter about batch.
Producing a single unified color would lower unit cost and increase feasibility.
I hope you don't get hung up on usb ports.
Most people will need more than one port.
Those who need ports will use hubs, and external ports can interfere with minimalism.
Anyway, I'm glad you guys keep trying new upgrades.
My wallet will be with you.
And some ideas.
Last edited:
The thorzone thing could be a sticker - he can just sell the decal - I would buy
I like this scene the most.
A full gear porn.
It's like Iron Man 1 suit scene.
When can I buy the aio with the Thorzone logo printed on it? Will it be considered with the gen4 card after the delivery is completed?
Question: for those who bought the booster cell - how is this configured?PRESENTING — THE DOCK
- Vertical MJOLNIR stand
- USB-C
- Front power button
Not sure which two-tone is best for Stealth, Dark and Steel respectively so feel free to let me know. Also tested have it as 1-tone but that looked really boring.