What is the power limit of this with with CPU and GPU connector? Can i run a 2080Ti?
Yes you are right theres one pin unpopulated on the gpu plug.
I can´t help myself and have dissasembled the psu... this thing uses gan mosfets, its all too small. its incredible.
Sorry for the delay, but I finished my work, met some friends etc. So until I've gotten home I haven't had time to do it.
This is a small album with some pics of the psu if you are interested, I cannot see many things, and also cannot dissasemble more without dessoldering the 220v input filtering, which h I'm not going to do right now.... And don't know if I'm going to do any day later because I'd like the psu to work for a long time lol .
The sense wires as you say are a bit thinner than the normal ones, sorry for the way I've made the drawing but it's not my thing....
The custom short length wires are also very nice and goes very well with most cases such as: NCase M1, Ghost S1, Dancase, SM-series, MI-6.
Thank you so much for helping me out. It is nice to have real confirmation from someone who owns it.
I need to cross reference the pinout diagrams but if you have cable making abilities, I would do the following:
Short 3.3V-S to any 3.3V
Short 5V-S to any 5V
Short GND-S to any GND
Short 12V-S to the open pin on your GPU 12V.
So what will happen is I'll offer a "PLAT" version with a small price increase where I pre-wire it for you. If you want to save a couple bucks you can order it as is and wire it yourself.
It'll take me 1 week to get an official PLAT version ready, as I'm busy with my case projects. It'll be a reasonable $5 increase for PLAT version.
The custom short length wires are also very nice and goes very well with most cases such as: NCase M1, Ghost S1, Dancase, SM-series, MI-6.
not sure if this is answered anywhere, but does the chipset pull power from the 24-pin or EPS power? o_o
Will it fit inside a ncase m1?
The custom short length wires are also very nice and goes very well with most cases such as: NCase M1, Ghost S1, Dancase, SM-series, MI-6.
If I was to buy the "Platinum" version (SF Platinum rated) of the M2427, would it be compatible with the Gold Corsair PSUs as well?
I have both (SF600 Gold and SF750 Platinum). In a years time I'm bound to plug it into the wrong Corsair rated PSU if they're not compatiable (Maybe label them on the PCB silkscreen?).
I ordered my M2427 yesterday. But just now I mean to remember that the Gold version has sensewires, too. In any case I know that I soldered the necessary connections myself and the PSU still works.
Is the Gold less susceptible to the missing sense wires than the platinum?
Sorry to bother you again, but do you have an ETA for the Platinum version wired by you?
Cool! Thanks a lot man!1-2 weeks. This week focus is getting the Pure X shipments out.