Log Lzmod Mini A24-V5 2.0 / R9 9950x / Noctua nh-l12s-x77_A25mm

[S4YIND]

 

[bn-l]

It looks like the fan is hitting the ram! Or maybe just touching?

o NH-L12S_X77 +25 MM FAN 3000 industrial, just the top of what you can put in 77mm!!!

At 200w is the fan at 3000 rpm?

 

[bn-l]

The website is intended for Chinese users - you can use a third-party site like Superbuy to order on your behalf.
Also, you will need to communicate that you want the 330w version with graphics plug, as the default version is lesser.

Superbuy is a great service and the shipping isn't too expensive down under. That DC-ATX was exactly what I'm thinking of. I need a lot of CPU and just a bit of GPU so I might get this also: https://item.taobao.com/item.htm?id=760211443484. More out of curiosity with it tbh.

Another option would be to go with a case that can fit Meanwell's LOP-300-12 power supply.
This still requires a DC-ATX module, but since the Meanwell outputs 12V, the module can be simpler in design.

Thank you for reminding me about this product. Is it dangerous having it in a case without an enclosure on it? It's weird having all that electrical stuff exposed.

 

[46x02]

Thank you for reminding me about this product. Is it dangerous having it in a case without an enclosure on it? It's weird having all that electrical stuff exposed.

It is reasonably safe, just don't poke at it while it's turned on. You could buy a polypropylene sheet and cut it to size, to place beneath the board to reduce the potential danger - it's a good electrical insulator.

 

[S4YIND]

Похоже, вентилятор бьёт по тарану! Или просто касается?



При мощности 200 Вт вентилятор вращается со скоростью 3000 об/мин?

Concerns only the fan mounting, the fan itself rotates freely!
At 200W, it's spinning at about 80% of 3000, but it's pretty quiet compared to the Arctic P8 MAX, which accelerates at 4000rpm at 80C). So the loudest place I have is not the Noctua 3000, but the 4 Arctic P8 MAX case fans.

 

[hrh_ginsterbusch]

Do you think a 70w GPU and the 9950x could be run on a 300w power supply? I'm thinking of using this case: https://caseend.com/data/bug/bug-d1 and an external power brick (lower heat, noise, etc).

DalraeMyo has built in that case, including using a DC-ATX PSU, so you might take a look into their build video, too:





cu, w0lf.

 

[TheJiral]

Really clean and sleek case. I like it.

 

[S4YIND]

I configured my Ryzen 9 9950x and got CURVA -40, 190W, 85C, 46,500ppt Cinebench R23. CURVA -30, 190W, 85C, 42,000ppt Cinebench R23. CURVA -20, 190W, 85C, 40,000ppt Cinebench R23.

 

[hrh_ginsterbusch]

I configured my Ryzen 9 9950x and got CURVA -40, 190W, 85C, 46,500ppt Cinebench R23. CURVA -30, 190W, 85C, 42,000ppt Cinebench R23. CURVA -20, 190W, 85C, 40,000ppt Cinebench R23.

so, was it stable at -40? or is that why you tried -30?

cu, w0lf.

 

[S4YIND]

so, was it stable at -40? or is that why you tried -30?

cu, w0lf.

-30 all core is stable, -40 works, but sometimes it freezes, I think if there is -30 and -40 on another chiplet, it will be better!

 

[krys]

Hi @S4YIND

This mod is exactly what I am looking for, I already have the cooler from another build and just ordered the case, accidentally stumbled upon this forum and build log. Are you able to provide a STL file for the spacer bracket, or at least tell me the required width and screw type/length, I know someone who could mill or 3d print me one, but I wouldn't be able to get started before the case arrives.

Much appreciated if you can share anything, it looks fantastic.