Production k_ses: k3.22L (HDPLEX 250W GaN / 5060 & 4060 LP )

[k0n]

v1.1 was a full success and is available (7/10)! I also have two v1.0s left, one of which I would like to sell. As nice as v1.1 is, v1.0 also has its advantages

Spoiler: more pics of my first v1.1 build

Spoiler: honest size comparison with the ASRock Deskmini

...

Spoiler: Original Post (v1.0)

I had ordered this v1.0 in mid-May, two days after finally getting my hands on a 4060 LP from Gigabyte. With the card in hand, I got a better idea of the dimensions and recognized the potential for a classic (riserless) layout that was smaller than the already existing cases.

Because this required me pushing to the limits sizewise, I was ready for it to fail, so the order was placed for just the base without a cover, and I wanted to wait and see before opening another thread.

Now, after testing for fitment, I decided to 3D print a cover and first use it some time / wait for other feedback before I order even more metal. It would be bad to come up with reasons to do a v1.1 in the weeks waiting for the v1.0 covers

*203×189×84 mm

 

[ChinStrap]

wow. this looks great.

 

[Arboreal]

No no no no no!
I so don't need an RTX 4060LP and as there weren't any small cases with direct GPU attachment, I was content with something a lot larger to carry round.
This epic design has messed that right up!

 

[DaHans]

Very nice! I also bought the 4060 LP to see how small it is.
Are you thinking about covering the Fans of the GPU like a grill or something? For transport reasons.

 

[k0n]

Are you thinking about covering the Fans of the GPU like a grill or something? For transport reasons.

Originally I had planned one big opening for the GPU, but because of the printed solution I was able to dial in the exact position of the fans, and am able to do something else for another card... or perforations for you

Note: this is a 3 part print so you can change them independently but it's also just connected with a simple joint at the edge.

(I'm currently traveling with it: And I just put it with the three fans onto the bottom of my backpack.)

 

[jujudk]

Damn i saw it on reddit, and it was my question
But a 3d printed cover is hella nice for upgradability

I don’t see any cpu cooler height limit listed but i guess 37mm with the hdplex on top ?

I think i'll one of your hand

 

[k0n]

I don’t see any cpu cooler height limit listed but i guess 37mm with the hdplex on top ?

The Arctic Alpine 17 LP that I have is 42,9mm and barely fits underneath the PSU.

I have ordered an AXP90-X53 and will try using it with a 25mm case fan. This would mean NF-A9 (rather than the popular NF-A9x14) and X53 full copper for maximum CPU cooling performance.

 

[DaHans]

Oh. I dind't see that. The case is completely 3D printed?

 

[k0n]

The case is completely 3D printed?

No just the cover (3 parts / 3 sides). The base is 1mm galvanized steel.

Otherwise it would be much weaker and or bigger.

 

[jujudk]

Yeah, the idea is smart !

Kinda surprised a 42mm thick cpu cooler fits, i expected a 37mm

Any idea on cost for the case ?

 

[k0n]

Any idea on cost for the case ?

I'm able to sell the 5 I made for 50€. 60€ with a switch (black with white led ring and 16mm diameter).

- 2 mm 3D printed cover (petg)
- 3D printed fan shroud for a 92mm case fan, which should allow for a AXP90-X53 + 25mm fan
- 1 mm unpainted galvanized steel base

 

[jujudk]

I expected a steeper price !

Definitely taking one in anticipation for m’y next build
I might not need the 3D printed cover for now, as i am unsure what gpu i’am gonna put in here, the base one is for the 4060 lp I reckon ?

 

[k0n]

@jujudk I'm flexible with the prints so I can package both the holes for a 4060LP and a perforated pattern that is in line with the other perforations.

PM/DM me

 

[Arboreal]

@k0n, could the 3D printed cover and fan shroud be made from sheet metal instead?

 

[k0n]

@Arboreal yes definitely.

 

[Arboreal]

@Arboreal yes definitely.

Thank you, that’s good to know

 

[jujudk]

@jujudk I'm flexible with the prints so I can package both the holes for a 4060LP and a perforated pattern that is in line with the other perforations.

PM/DM me

Definitly Pming, i need to find a cheap am4 itx mobo now or go am5, and a LP gpu

 

[k0n]

Most of you are probably familiar with the ASRock Deskmini?

One v1.0 left to sell, and a v1.1 is on its way (~January).

 

[Arboreal]

That's amazing to see as an A300 owner

A brickless setup is preferable, and adding a GPU will be easier and more effective than on a Deskmini

 

[k0n]

Spoiler: Pics

The v1.1 is a full success. It actually arrived only a couple of days after ordering, but I was away for work and then had a lot to do before during and after the holidays.

What might be relevant about the build:

- R7 7800X3D
- AXP90-X47 full copper
- Arctic F9 (92x25 mm)
- Gigabyte B650I AX
- Gigabyte RTX 4060 LP
- HDPLEX 250W GaN

~2,4kg despite the full copper heat sink.

Spoiler: 7800X3D <80°C <1400RPM

My 7800X3D is limited to 56W PPT... This results in the multicore score in CinebenchR20 only dropping to ~ 6700 vs. stock ~6900. That's the biggest performance loss that you can expect, and even that is VERY insignificant. Gaming is probably within measuring / chip to chip tolerance.
...
However, the CPU cooling capabilities are definitely there and AXP-X53 full copper + NF-A9 non x14 would also be possible. There are the 12 and 16 cores and one could quickly adjust the PPT in software according to the task... if the GPU is idle there is more power available for the CPU!