Can't seem to edit #0 with below:
It started out with
Unobtainable, then a
SG09 mod that got replaced soon after with my own case designs.
At the time there wasn't any real SFF cases so I looked into the option of using a laser cutter and assembly the parts into a good case (RAW V1 + V2) (Wood V1 + V2). This makes the cases cheap, easy to model, fast production and possible to create in various materials. Most of my designs can be downloaded and is free to use
Raw V1 + V2:
Wood V1 + V2 (V1 never got of the ground):
If you want to build it your self, the 2D drawings is uploaded here:
https://www.dropbox.com/sh/gvfatib8gnjq06y/AAAVMfSu81-KovTgAdLkWuCMa?dl=0
BUT, note that:
1) The files are currently for 6mm material that can be clued together!
2) The PSU Fan cutout is specific for the AX850. If this is not the same on your PSU, the square in the bottom must be adjusted (size and positiong)
3) The PSU installations screws are placed only in the corners. Not all PSU's have that.
4) Check that the file has the right dimensions before you begin cutting. The small taps should be 15mm long and 6mm high