Fully 3D Printed 6.7 Liter Build

[MoeweX]

Hi,

I have just finished 3D printing the latest prototype of my 6.7 liter build. I decided to create my own case because I wanted to use a CPU fan that is higher than the ones supported by the DAN Case (my so far favorite sff case), while also not having to rely on a small form factor video card. In addition, I could not stand the idea of having wasted space in the form of slots for 2.5" or 3.5" SATA drives, as I am using M2 NVME SSDs .

I put the following hardware into the case:

• CPU: Intel i5-8600
• GPU: KFA2 GTX 1060 3GB
• RAM: Corsair Vengeance LPX 8GB 2666Mhz
• Mainboard: Asus ROG Strix B360-I
• 1st Drive: 500GB Samsung 960 Evo M.2 2280 NVMe
• 2nd Drive: ADATA 128 GB M.2 SSD
• Netzteil: SF450

In summary, my case has roughly these (inner) dimensions: 208 * 245 * 132. My walls are 5mm thick, for a better stability, as everything is printed in PLA.

I hope you like my design , you can print it yourself or customize it, it is available on Thingiverse.

 

[craghawk]

Thank you for sharing the files

 

[Ratakis]

Does it support mini atx

 

[InfernoZeus]

Nice build! Looks like you could do with one of these, if you can squeeze it in: https://www.aliexpress.com/item/Gra...IN-Adapter-180Degree-Turning/32968533069.html

 

[MoeweX]

Nice build! Looks like you could do with one of these, if you can squeeze it in: https://www.aliexpress.com/item/Gra...IN-Adapter-180Degree-Turning/32968533069.html

Nice, I did not know that such as thing exists, that would make it look much cleaner, thanks!

Does it support mini atx

Do you mean micro-atx? If so: no. If you mean mini-itx: yes . Also see here: https://www.gamingscan.com/wp-content/uploads/2018/01/atx-vs-micro-atx-vs-mini-atx-1.jpg