Yes, I've found that printing on the EPDM from McMaster Carr comes off with IPA pretty easily.
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Yes, I've found that printing on the EPDM from McMaster Carr comes off with IPA pretty easily.
You meant to say, "he didn't mean for this to be a full time job, but it has become more than a full time job on top of his current career", right?
???
When asked what I do for living, my response “scrap metal artist”, that’s how you get the ladies you know ?
When asked about hobbies, my response “empty metal boxes”, that line is conversation starter at wedding parties ?
I believe each slot = 20 mm of thickness and there is a 3 slot config.
As for 59.2 vs 59.9, I would imagine there's enough play for 0.7mm of clearance, but I'm just speculating.
Yeah well, I'm sure if you take some of the CNC pieces, put then on a pose and give them some photoshop they might qualify as sculptures (so long as you don't make their size obvious) ???
bigben, hetvler, Boil, madejackson
Met with SirJack this today, the Morpheus II + Noctua 15mm Slim fans will not fit in 3-Slot GPU Mode. Maybe 5mm too thick.
Which makes me believe the Accelero Xtreme III should fit.
Nvidia RTX 3000 series is coming anyways, so maybe a full 3-Slot air cooled GPU will be the better way to go.
I agree in the stock config the Accelero Xtreme III is 54mm (with fans and shroud) not including the PCB/backplate of the card.
In the tomshardware review it adds 6mm. So take the default fans off for slim ones and it will most likely fit
Last edited:
Alphacool has this 8/13mm ittings if anyone is interested! I will use them in the future 3900X/Titan V full watercooled system!
www.alphacool.com
Alphacool HF Anschraubtülle TPV Metall - 90° drehbar 12,7/7,6mm - Black
Der Alphacool 90° TPV Metall Anschluss stammt aus der Enterprise Solutions Produktlinie von Alphacool und wurde speziell für die Verwendung der Alphacool TPV-Schläuche entwickelt. Enterprise Solutions Anschlüsse? Alphacool verwendet...
www.alphacool.com
Last edited:
Neat. This one is 7mm narrower than the EK one (21mm vs. 28mm): https://www.ekwb.com/shop/ek-af-angled-90-g1-4-blackAlphacool has this 10/13mm ittings if anyone is interested! I will use them in the future 3900X/Titan V full watercooled system!
Alphacool HF Anschraubtülle TPV Metall - 90° drehbar 12,7/7,6mm - Black
Der Alphacool 90° TPV Metall Anschluss stammt aus der Enterprise Solutions Produktlinie von Alphacool und wurde speziell für die Verwendung der Alphacool TPV-Schläuche entwickelt. Enterprise Solutions Anschlüsse? Alphacool verwendet...
Just curious. How much worse are the temps of a sidearmd t1 with a glass pannel co pared to one with a mesh panel?
It will suffocate the fans since the mesh panel is the main source of airflow
Been going back and forth between this and a few other potential cases here, but I think my heart finally settled with this one. Good airflow, great size and nice looking. Can't wait till I can order this. I'm currently using the Cerberus for my threadripper rig, which is about twice the size of this case.
Do we know when preorders opens? And is it all going to be through the https://sidearmd.com website?
Maybe in March, not definitive.
Order through sidearmd.com
All depends on when China opens its manufacturing again, there are many places which are still closed. @Wahaha360 will announce it when orders open up
Actually got a couple of those fittings in the mail Yesterday.Alphacool has this 10/13mm ittings if anyone is interested! I will use them in the future 3900X/Titan V full watercooled system!
Alphacool HF Anschraubtülle TPV Metall - 90° drehbar 12,7/7,6mm - Black
Der Alphacool 90° TPV Metall Anschluss stammt aus der Enterprise Solutions Produktlinie von Alphacool und wurde speziell für die Verwendung der Alphacool TPV-Schläuche entwickelt. Enterprise Solutions Anschlüsse? Alphacool verwendet...
@ Australians who are planning on getting an LT240.
Having trouble tracking one down for a reasonable price. Cheapest I've found is direct from Alphacool but it will be over $220AUD.
Another option is to build my own because I can track down a Fractal Kelvin and swap out the rad. But I would need to use a different radiator than the LT240. Which I do not want todo. Rather stick with the OP's recommendation.
HMU in my DMs or here if you have found a good way to get them.
Having trouble tracking one down for a reasonable price. Cheapest I've found is direct from Alphacool but it will be over $220AUD.
Another option is to build my own because I can track down a Fractal Kelvin and swap out the rad. But I would need to use a different radiator than the LT240. Which I do not want todo. Rather stick with the OP's recommendation.
HMU in my DMs or here if you have found a good way to get them.
I just looked into mailing you one it would be roughly the same price as if you got it in aus plus shipping
Similar threads
