Pssst, Corsair.com has restocked SF series PSUs. Grabbed an SF750. If you join the mailing list you can get 10% off as well.
Talking about corsair SF PSUs...
www.anandtech.com
Corsair Issues Recall for Recent SF Series Power Supplies
Rip I just ordered one, but it should have been produced after March so I think I should be fine.Talking about corsair SF PSUs...
Corsair Issues Recall for Recent SF Series Power Supplies
Last edited:
Nice!, Cant wait to throw my money to you!
A little off-topic, but stumbled upon this article yesterday. Just a little something to keep an eye out for, my dudes.
www.tomshardware.com
Corsair Recalls SF Series Platinum PSUs Over Failure Concerns
Some PSUs fizzle out
It was just posted about 5 posts upA little off-topic, but stumbled upon this article yesterday. Just a little something to keep an eye out for, my dudes.
Corsair Recalls SF Series Platinum PSUs Over Failure Concerns
Some PSUs fizzle out
i have the beige/brown viton tubing, so it's difficult to directly compare its appearance with the black, but the viton does appear to be more matte than the santoprene (tho the difference is less noticeable than it was going from epdm to santoprene). the viton is definitely denser/heavier though, and as a result, when you run the two alongside each other and incrementally bend them, the viton doesn't collapse until deeper into the bend.
and i had a (crappy) pic of the epdm in my build in a similar setup to how i have it now with the santoprene, so figured i'd try and mimic the shot so you can see somewhat of a comparison. left is mcmaster-carr epdm, middle is santoprene only, right is santoprene + viton ("beige" color) just kind of laid in there. please ignore the dust ?
i have the beige/brown viton tubing, so it's difficult to directly compare its appearance with the black, but the viton does appear to be more matte than the santoprene (tho the difference is less noticeable than it was going from epdm to santoprene). the viton is definitely denser/heavier though, and as a result, when you run the two alongside each other and incrementally bend them, the viton doesn't collapse until deeper into the bend.
and i had a (crappy) pic of the epdm in my build in a similar setup to how i have it now with the santoprene, so figured i'd try and mimic the shot so you can see somewhat of a comparison. left is mcmaster-carr epdm, middle is santoprene only, right is santoprene + viton ("beige" color) just kind of laid in there. please ignore the dust ?
Wow! Now you can match your tubing to the Noctua fans!
I didn't. I'm sure I subscribed before. Glad I manually checked it out today
At least 2 days of advanced email alert / notice before preorders start.
I'm going to merge the T1 email list from SFFLAB, Sidearmd old website and the current website into one list and email.
I didn't make an update or email anyone about opening the website for *viewing b/c non-english speakers and people outside the forum might think already sold out, and my email inbox and PM will just explode with anger due to misunderstanding.
Somehow, I wonder if the number of people trying to purchase the case might crash the server!?
Very happy to see this post, since I just received my Alphacool LT pump and was dreading on what orientation I could place it on this exact motherboard (it looks like my ASRock Z390i Phantom Gaming). I really did not want to take off my BS3 tonight, since I just arrived from work and was too tired. But I really thought I would need to consider a Plan B if my LT Pump would not fit. Thank you, @notbitcoin !i have the beige/brown viton tubing, so it's difficult to directly compare its appearance with the black, but the viton does appear to be more matte than the santoprene (tho the difference is less noticeable than it was going from epdm to santoprene). the viton is definitely denser/heavier though, and as a result, when you run the two alongside each other and incrementally bend them, the viton doesn't collapse until deeper into the bend.
and i had a (crappy) pic of the epdm in my build in a similar setup to how i have it now with the santoprene, so figured i'd try and mimic the shot so you can see somewhat of a comparison. left is mcmaster-carr epdm, middle is santoprene only, right is santoprene + viton ("beige" color) just kind of laid in there. please ignore the dust ?
Edit: Corrected spelling.
Last edited:
Similar threads
