Hi All,
This is my first time building SFF.
Cable Management was easy due to Custom length cables. The most painful part is tightening the EK fat 90-degree Quantum fittings in tight corners as it has no proper grip and I have to use lots of pressure on my fingers until the fingernails recede a little.
I've left the RGB while taking photos for those who are thinking of add RGB. Usually, I would just turn it off.
PC Parts
Case: Ncase M1
Processor: AMD 3950x
M/B: Asus ROG Crosshair VIII Impact (X570 Mini-DTX)
GPU: ASUS EKWB GeForce RTX 3090
Ram: G.Skill Trident-Z 32 GB 3200Mhz (OC 3600mhz) [recycled from previous RIG]
Storage: Samsung 970 1TB Pro M.2 and 980 1TB Pro m.2
PSU: Corsair SF750
PSU sliver cables are made by pslate customs.
Fans: Noctua NF-A12x15 PWM and NF-A12x25 PWM
Water Cooling Parts
CPU WaterBlock: EK-Supremacy EVO Elite Edition [recycled from previous RIG]
Radiators: A pair of XSPC TX240
GPU WaterBlock: Preinstalled EKWB
Reservoir: IceMan Cooler
Pump: Switftech DDC with PCB board replaced with DIYINHK.
Fittings: EK 90 Degrees Quantum and Classic fittings, Koolance soft tube fitting ID:10mm OD:16mm,
Quick Disconnect: Koolance QD4
Hardline pipe: EK Static Extenders and Koolance adjustable Extenders.
Soft Tubing: Primo LRT ID:10mm OD:16mm
Coolant: Koolance LIQ 705 with Mayhems Inhibitor + Biocide added
This is my first time building SFF.
Cable Management was easy due to Custom length cables. The most painful part is tightening the EK fat 90-degree Quantum fittings in tight corners as it has no proper grip and I have to use lots of pressure on my fingers until the fingernails recede a little.
I've left the RGB while taking photos for those who are thinking of add RGB. Usually, I would just turn it off.
PC Parts
Case: Ncase M1
Processor: AMD 3950x
M/B: Asus ROG Crosshair VIII Impact (X570 Mini-DTX)
GPU: ASUS EKWB GeForce RTX 3090
Ram: G.Skill Trident-Z 32 GB 3200Mhz (OC 3600mhz) [recycled from previous RIG]
Storage: Samsung 970 1TB Pro M.2 and 980 1TB Pro m.2
PSU: Corsair SF750
PSU sliver cables are made by pslate customs.
Fans: Noctua NF-A12x15 PWM and NF-A12x25 PWM
Water Cooling Parts
CPU WaterBlock: EK-Supremacy EVO Elite Edition [recycled from previous RIG]
Radiators: A pair of XSPC TX240
GPU WaterBlock: Preinstalled EKWB
Reservoir: IceMan Cooler
Pump: Switftech DDC with PCB board replaced with DIYINHK.
Fittings: EK 90 Degrees Quantum and Classic fittings, Koolance soft tube fitting ID:10mm OD:16mm,
Quick Disconnect: Koolance QD4
Hardline pipe: EK Static Extenders and Koolance adjustable Extenders.
Soft Tubing: Primo LRT ID:10mm OD:16mm
Coolant: Koolance LIQ 705 with Mayhems Inhibitor + Biocide added
