Log CM NR200P DUAL 280MM

[FiftyFifty]

New to the forum and wanted to show off my old build. Hope you enjoy.

• Cooler Master NR200P Black
• AMD Ryzen 7 3700X
• Asus ROG Strix X470i Gaming
• Gigabyte GTX 1080 Xtreme + Bykski waterblock
• Corsair 2x8GB DDR4 3200Mhz CL16
• WD Black SN750 1TB M2 NVMe SSD
• Crucial P2 1TB M2 NVMe SSD
• Corsair SF600 600W PSU
• Barrow CPU Water Block Combo
• Alphacool 13/10 PVC Transparent tubing
• EK-CryoFuel Clear
• EK-Torque Fittings 13/10 Nickel
• Aquacomputer sensor
• 2 x Corsair Hydro X Radiator XR5 280mm
• 4 x Arctic P14 PWM 140mm
• 2 x Arctic P12 PWM 120mm
• 2 x Mini Antennas 5cm

 

[thelaughingman]

remember seeing your build on r/sffpc. Mad props friend!

 

[zk2004mb]

Have you tested the water flow rate?

 

[FiftyFifty]

Have you tested the water flow rate?

No sorry i have not.

 

[zk2004mb]

No sorry i have not.

I strongly advise you test it. I did a triple rad build in nr200. 1x 280gts, 2x TX240.
One 18w DDC pump is not strong enough. I got only 0.7~0.8 GPM at max speed and it's very noisy.
I end up with two 18W ddc pump, now I can reach 1.2GPM at max. 0.75GPM at quiet.

 

[FiftyFifty]

Thanks for the info. My water temp maxed out at 36 celcius with relative slow fan rpm so i have not had any reason to worry.

 

[zk2004mb]

Thanks for the info. My water temp maxed out at 36 celcius with relative slow fan rpm so i have not had any reason to worry.

That's a solid number. I tested mine simply because I want to achieve 1.5GPM