Stalled Catz C-1 (5L), C-SFX (10L) and C-WS (15L)

[CubanLegend]

Correct me if I am wrong, but isn't the S4 actually smaller than this? Indeed I initially wanted to S4 because it was smaller - but this is slightly larger.

odd, i see the OP states 5L which is bigger than the S4's 4.7L, but I also remember reading a comment about this case being 4L, which is it exactly?

 

[bledha]

odd, i see the OP states 5L which is bigger than the S4's 4.7L, but I also remember reading a comment about this case being 4L, which is it exactly?

I believe it is what is listed in the first posting. And the S4 is 4.3L as seen on the NFC website.

Specification:
- Volume: 350x209x69 (5,04L) with unibody, 379x217x69 (5,67L) with unibody

C1 ^

 

[CubanLegend]

I believe it is what is listed in the first posting. And the S4 is 4.3L as seen on the NFC website.

yup, you're right. I'm bad with numbers, I should double check before i state them . I always confuse the original PS4's volume with that of the S4 mini, too.

 

[bledha]

yup, you're right. I'm bad with numbers, I should double check before i state them . I always confuse the original PS4's volume with that of the S4 mini, too.

Me too - I am the most forgetful person ever! I am just lurking here excited to get my C1. Speaking of which, I am also interested in what @deadz0ne asked, because I never thought about it!

Hey, do the Vandal switches come pre-wired or do I need to buy the connectors seperatly?

Let us know, @amitoza, I never thought about that!

 

[CubanLegend]

By the way are the feet that someone mentioned, a part of the case or seperate? can I buy some similarly shaped non-slip feet?

 

[fminus]

Catz C1...The unibody prototype he showed is 351x212x67mm. The S4 mini is 330x215x63. I believe that 20mm difference in width is due to the parvum cubes being used.

 

[eggDK]

... smaller C1 (C2?) 4L based on this design - still with 2xSSD 2.5" support.

This looks even more interesting! Is this one next in line, or what's your plan?

 

[fminus]

This looks even more interesting! Is this one next in line, or what's your plan?

That won't be ready for another month at least

 

[Runamok81]

@amitoza - The C1 will fit a GTX 1080 Mini. Will the new "C2" also fit this? What are the planned dimensions of the C2?

 

[fminus]

@amitoza - The C1 will fit a GTX 1080 Mini. Will the new "C2" also fit this? What are the planned dimensions of the C2?

I posted the dimensions above. Those should be correct. The old C1 with unibody front was 379x217x69

 

[Runamok81]

@fminus. You sure? I'm not seeing the C2 dimensions listed anywhere. Any help?

 

[fminus]

@fminus. You sure? I'm not seeing the C2 dimensions listed anywhere. Any help?

Pretty sure, I asked via email and that's what he got back to me with. (Also the C2 is actually mine )

 

[br3nd0]

Is a slim ODD cutout AND front USB 3 / 3.1 cutout possible?

 

[Runamok81]

Pretty sure, I asked via email and that's what he got back to me with. (Also the C2 is actually mine )

I'm looking for the Length x Width x Height numbers of the planned C2.

 

[Jonny727272]

Nice case, here's a funny story on how I discovered it... on Reddit someone wanted an S4 mini and another posted said "you could buy this case instead for cheaper".

Oh hey, it's me I've tried to share this case as much as possible over on the sub. It's a great alternative to the S4, and like you mentioned, the GPU facing up looks really nice.

 

[Grafite]

Oh hey, it's me I've tried to share this case as much as possible over on the sub. It's a great alternative to the S4, and like you mentioned, the GPU facing up looks really nice.

I too have done the same on reddit. While it is very similar to the s4, I think the Catz cases are great just due to how fast amitoza will have it out to you. Something that appeals to a lot of people, including me.

 

[amitoza]

Hey, do the Vandal switches come pre-wired or do I need to buy the connectors seperatly?

Pre-wired, sleeved.

 

[amitoza]

By the way are the feet that someone mentioned, a part of the case or seperate? can I buy some similarly shaped non-slip feet?

Small feets are part of kit.

sorry for not responding - l had some problems with my internet supplier - 3days with no internet

Even more - my company bend unibodies for second batch "Inside out", and I have to wait to tuesday, for new one.... again one week delay

 

[bledha]

Even more - my company bend unibodies for second batch "Inside out"

You need to have a talk with that company! Inside out!

Pre-wired, sleeved.

Great attention to detail, and so nice to have that included. Thank you!

Did you get the last batch shipped on Thursday as planned?

 

[JoeSFF]

when can we expect these to be shipped?