Besides Curve Optimizer I don't think so. You can lower the PPT manually though, which won't cost much performance, especially if you add 200 MHz via Boost Overdrive.
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Motherboard [08/12/2024]ASRock DeskMini A/X300 BIOS /"P2.00.SL01"(Curve Optimizer & S3 support) & "P2.10" for X300 - AGESA ComboV2 PI "1.2.0.Cc"
- Thread starter HydrAxx747
- Start date
Crucial Ballistix BL2K16G32C16S4B 3200 MHz (16GB x2). Settings via XMP profile.
I exported the BIOS and tried to use a dump tool to and convert it to text but wasn't successful.
You could try to manually increase timings (CL etc), lower the speed to e.g. 3000 MHz, and/or manually increase voltage (I'm not sure if it possible to go over 1.35V though). XMP RAM is always tricky, can work, but you can't be sure. Is this particular set on the supported list?
I am using 2x16GB) 3200MT/s CL22-22-52 1.20V (G.SKILL Ripjaws F4-3200C2D-32GRS), only enable xmp 3200mhz at 1.35V, do you have any tips on overclocking the ram a bit, to gain a lettle performance?
Does that RAM have any XMP profile in its SPD ROM? Couldn't find any info regarding that on the G.SKILL homepage, thus it doesn't seem so. You can try to increase voltage to 1.35V and then lower settings for tCL, tRASCAS, tRASPrecharge, tRAS and tRC, and run RAM stability tests. I haven't tried this, I prefer my Deskmini cool and quiet.
the ram only got one xmp profile of 1.35V 3200mhz-16-18-18-36,Does that RAM have any XMP profile in its SPD ROM? Couldn't find any info regarding that on the G.SKILL homepage, thus it doesn't seem so. You can try to increase voltage to 1.35V and then lower settings for tCL, tRASCAS, tRASPrecharge, tRAS and tRC, and run RAM stability tests. I haven't tried this, I prefer my Deskmini cool and quiet.
could i just keep increase the 3200 mhz setting without touching tCL, tRASCAS, tRASPrecharge, tRAS and tRC until the system unstable?
You mean just increasing the frequency, but leaving timings at the JEDEC specification of e.g. CL22? Could work with higher voltage. I'm not sure what would be the benefit of that, the lower CL setting at 3200 should help to increase performance, then again, what do you need it for anyway? Games? Running RAM beyond its specification always comes with risks of instabilities.
It is possible to just swap 5600g to 5700g, without reinstall windows or bios , currently on deskmini x300 with bios p1.90,
does 5700g recognizable in bios p1.90, as i just swap to 5700g ,it would not even get into the bios ,
Or do i need to update to the latest bios before swapping to 5700g
does 5700g recognizable in bios p1.90, as i just swap to 5700g ,it would not even get into the bios ,
Or do i need to update to the latest bios before swapping to 5700g
It is possible to just swap 5600g to 5700g, without reinstall windows or bios , currently on deskmini x300 with bios p1.90,
does 5700g recognizable in bios p1.90, as i just swap to 5700g ,it would not even get into the bios ,
Or do i need to update to the latest bios before swapping to 5700g
does 5700g recognizable in bios p1.90, as i just swap to 5700g ,it would not even get into the bios ,
Or do i need to update to the latest bios before swapping to 5700g
5700G is supported by P1.90, it could be required to re-activate Windows. Be sure to follow the required steps if you use Bitlocker.
After i swap to 5700g ,it cant even boot into bios or windows, just stuck at a black screen and i try to the press F2
to enter bios and etc.
But it doesn't response no matter whay keys i press,
i dont know if it is a compatible issue of the bios or what,
or do you think the CPU is a defect
or i just missed some step?
does it required to update to the latest BIOS?
Last edited:
5700G is supported since BIOS 1.70. If it shows you the Press F2/Del to enter BIOS message, the CPU should be up and running. Did you try to clear CMOS/unplug the battery?
Last edited:
I have tried clear CMOS/unplug the battery and also use different keyboard while putting one the 5700g,no matter what method i try , it just cannot get into the bios. but once i have swap back to 5600g, everyrthing become normal back.
I dont have another am4 motherboard to test the 5700g, this only the only thing i didnt try yet.
I think i should the return and refund the 5700g, just too frustrated to fix the issue maybe giving up to upgrade
I'm on P2.00.SL01 and it breaks PBO settings 
if you want to get the most out of your 5700G, stick with 1.80 because that's the BIOS where PBO etc still work.
if you want to get the most out of your 5700G, stick with 1.80 because that's the BIOS where PBO etc still work.
Last edited:
PBO should work with 1.90, too. 2.00 breaks PBO and Curve Optimizer, as you've mentioned.
Hi, you shouldn't complain to me about this, I am not the one who edits, patches or updates BIOS, I only share what the ASRock BIOS department sends me, nothing else, if you have any problems (even minor ones) do not hesitate to report them to the following email address while briefly specifying your configuration used (deskmini model, CPU, RAM at least, and OS if it is a software problem): support@asrock.nlI'm on P2.00.SL01 and it breaks PBO settings
It is literally their job to fix problems so if people only complain on private forums or reddits, then they cannot fix problems they are not aware of, they are not fortune tellers
.
Last edited:
Done.Hi, this is not me who should be complaining about this, I am not the one who edits, patches or updates BIOS, I only share what the ASRock BIOS department sends me, nothing else, if you have any problems (even minor ones) do not hesitate to report them to the following email address while briefly specifying your configuration used (deskmini model, CPU, RAM at least, and OS if it is a software problem): support@asrock.nl
It is literally their job to fix problems so if people only complain on private forums or reddits, then they cannot fix problems they are not aware of, they are not fortune tellers
I'd like to get copies of Beta-BIOS "P1.91" and new Test-BIOS "P2.00.SL01", however the Shared Folder on UploadNow only says "This folder does not contain any files." Do I need to pay for an account there to make the files visible? TIA...
No account needed, I reuploaded the BIOS files:
Download
A file is available for download and streaming via UploadNow by following this link
uploadnow.io
Similar threads
