Production 2.65L case, for Partaker B18 mini-PC, with low profile GPU

[CARC Mini]

if you have a Partaker B18 mini-PC, Intel 9th or 10th Gen [ https://www.aliexpress.com/item/4001164528072.html?spm=a2g0o.cart.0.0.46603c00ugB2SB&mp=1 ] ,this 2.65 litres case is available, and will allow you to use a low-profile GPU.

external PSU will be recommended, based on Intel processor. M.2 to PCIe adapter and M.2 SSD storage is required.

approximate dimensions are 222mm X 173mm X 69mm, design credit to NFC Systems.

 

[REVOCCASES]

Nice. Do you have more pictures? Which M2 to PCIe riser will work with you case?

 

[CARC Mini]

Which M2 to PCIe riser will work with you case?

i'm still doing testing, & will make recommendations afterwards.

Nice. Do you have more pictures?

sure, below is a photo of the rear, from a Intel 8th Gen model of the computer.

MSI GTX 1650 Lp is shown installed.



i assume people will be using a Intel 9th Gen or 10th Gen model.

final version of this case will have cutouts for every port, which is on the original case, for a 9th or 10th Gen model.

circular holes are for DC-In, headphone/speaker jack, & later on i'll add circular holes for WiFi antennas.



list :

a) 6 USB ports
b) 1 USB Type-C port
c) 1 DisplayPort
d) 1 HDMI port
e) 2 RJ45 ports
f) WiFi antennas
g) DC-In for AC brick
h) headphone/speaker jack



design credit to NFC Systems.

 

[REVOCCASES]

i'm still doing testing, & will make recommendations afterwards.




sure, below is a photo of the rear.

MSI GTX 1650 Lp is shown installed. and it has cutouts for every port, which is on the original case.

circular holes are for DC-In, headphone/speaker jack, & later on i'll add circular holes for WiFi antennas.



list :

a) 6 USB ports
b) 1 USB Type-C port
c) 1 DisplayPort
d) 1 HDMI port
e) 2 RJ45 ports
f) WiFi antennas
g) DC-In for AC brick
h) headphone/speaker jack

If you could fit the EXP GDC BEAST riser somehow, I guess the case could even support higher TDP GPUs.

PS: photo not showing (at least for me)

 

[CARC Mini]

PS: photo not showing (at least for me)

photo is there now.

 

[CARC Mini]

its important that you have the model of this computer, where its CPU fan is pointing upward.

there are other models where its not, which i haven't tested.

 

[CARC Mini]

if your video card is over 75W, you'll need a power brick, like this : https://smallformfactor.net/forum/t...200w-power-brick-active-passive-cooled.14597/