Other 0.16L SFF system

[tinyitx]

Not sure if this has been posted before but I came across this SFF case (0.61 x 0.61 x 0.43) which houses a mobo with Intel Celeron N4100.
This is truly SFF. I wonder what its PPL score would be.

CHUWI LarkBox, the World's Smallest 4K Mini PC, Launched on Indiegogo for $149 and Up - CNX Software

The world's smallest 4K mini PC - CHUWI LarkBox - powered by an Intel Celeron N4100 Gemini Lake processor, 6GB RAM, and 128GB storage has just launched.

www.cnx-software.com

More pics here:- https://tieba.baidu.com/p/6832693137

 

[AlexTSG]

I backed the campaign in the first few days, and yesterday I ordered the upgrade to a 240GB M.2 SSD. The standard unit comes with 128GB of eMMC and a empty M.2 SATA slot supporting 2242 form factor SSDs.

As most PPL calculations need to include the AC adapter, I think it's going to be around 0.3-0.4L in total. They did upgrade to a smaller AC adapter as one of the perks.

Sadly, given the small size, this doesn't support USB C PD (despite it using a USB C connector for power), otherwise I would have probably ordered a GaN charger to power it.

 

[Aux]

This is truly SFF. I wonder what its PPL score would be.

cpu score cinebench r20 - 590 (from what I could find)
gpu score - 360 (maybe, couldnt find a timespy result)
assume volume - 0.4



PPL 3 result - 8395

 

[AlexTSG]

I'll make an entry in the PPL 3 thread once mine arrives.

I also saw that the early samples sent to reviewers had options in the BIOS to change power limits for the CPU, and some overclocking options. I hope they stay in the final shipping BIOS. If they do, I may see if I can improve the performance with some better thermal pads or paste, and an overclock.

I'll post stock and overclocked (if possible) PPL.

 

[WholemealDrop]

Think this would handle design and slicer work for a 3D printer? This would be fantastic to have an almost autonomous printer setup with a small monitor and Bluetooth mouse/keyboard.

 

[AlexTSG]

Think this would handle design and slicer work for a 3D printer? This would be fantastic to have an almost autonomous printer setup with a small monitor and Bluetooth mouse/keyboard.

It depends on what software you're using, but from what I can see for something like 3D Slicer, the lack of dedicated graphics in this could be a problem. The rest of the config looks like it will do.

Documentation/4.8/SlicerApplication/HardwareConfiguration - Slicer Wiki

www.slicer.org

 

[WholemealDrop]

It depends on what software you're using, but from what I can see for something like 3D Slicer, the lack of dedicated graphics in this could be a problem. The rest of the config looks like it will do.

Documentation/4.8/SlicerApplication/HardwareConfiguration - Slicer Wiki

www.slicer.org

Ah fair point, either way this is a sweet little box.