skyreach 4 mini

I was wondering if anyone has used some kind of dust mesh on the Skyreach 4 mini ventilation holes. Could it be a good idea to sell it as a separate product on the NFC website? On the other hand, I was wondering if Josh considered building the 4 Mini on magnesium alloy rather than aluminum...

Am I able to cut the case to fit a Scythe BS2 Rev.B - Im expecting the fan to stick out as that is 12mm thick - but the heatsink should theoretically be at the edge of the case's enclosure or probably wont close assuming its heatsink is 46mm. (stock cooler and fan - 58mm) Since im currently...

I've started to become curious with AIOs and the 8700k and I really not sure if it can fit an barely fit any AIO of any degree while sandwiched inside the case like how I have my 46mm clearance with a Cryorig C7 and a Noctua 14mm fan - despite 45mm being the official clearance due to the fan's...

Hey all, I am doing a itx build in the NFS skyreach mini case. I am attempting to go all out in the smallest form factor i can because... why not? But i have run into a bit of a problem that i can seem to solve. I am running a 65w CPU and a 1080 mini, The motherboard, cpu, and ssd are all...

Image: https://i.imgur.com/hwLp5eV.jpg Asking 60 euro + shipping.

My current build is - i5-8400 ASUS ROG STRIX Z370i ITX 2x8GB DDR4 2114MHz WD Blue 500GB M.2 HGST 1TB 2.5" 7200RPM HDD Kingston 120GB SVNOW300 SSD (to a Seagate Buracuda 2.5" 2TB 5400RPM HDD or run them both if safe?) Gigabyte ITX GTX970 4GB NFC Skyreach 4 Mini (R2) HDPLEX 400W DC-ATX Adapter...

–Hello, World I'm new to the SFF community and would like some advice on my first build. I just purchased the S4 and couldn't be more excited! I want the best performance for blender and some minor deep learning task. I'm not a windows user so this build will most likely be Linux or macOS. As...

Hi SFF-Forum, im having really weird temperature issues with my build below: SilverWolf (Skyreach 4 Mini) https://au.pcpartpicker.com/user/HYPERTiZ/saved/Lcyr7P This is with MCE, Turbo & Sidestep disabled. i5-8400 & Noctua L9i idle Temp in a Skyreach 4 Mini (R2) --- EDIT - TLDR - Problem...

╭─━━━━━━━━━━━━─╮ ╭ ◦ ¤ ◦ ◦ ╮ XEPHYR DRIFTR West Wind Drifter ╰ ◦ ◦ ¤ ◦ ╯ ╰─━━━━━━━━━━━━─╯ TL;DR: Newbie to PC-building, fell in love with S4M. My budget weeps but my heart has hardened. Halp ╭ ¤ ◦ ╮ P C • P A R T • P I C K E R • L I S T ╰ ◦ ¤ ╯ I've been looking into build videos...

I wanted to see if I could make the cabling more manageable and somehow make just a straight connection from a HDPlex 160W DC-ATX without any male/female connectors being in the mix as I feel that clutters the overall cabling and look of a build. First I thought about taking the 4 pin connector...

here are the parts I ordered and where i'm stuck. currently waiting for the case and power supply to get here *** skyreach 4 mini *** i7 8700k (dont ask why im getting this for a streaming PC, I want the highest preset possible on OBS, an expensive and hot experiment and future...

Just built my first SFF build, for some reason I can't get it to POST. There is one single beep/buzz when I hit the power button, which apparently means a memory error, but no matter the ram configuration nothing changes; I have tried both sticks in both slots, and each stick individually in...

Hello Meat Wagons, I recently purchased the NFC Skyreach 4 Mini and plan to build it according to the specs recommended by Josh (listed below). This will be my first build although I do have low/medium level knowledge of computer components. Just wondering if anyone can confirm or comment on...