sff case

UPDATE: Renders of the current version (45% finished): List of changes: - Size: This is now a 17.3 inch machine! So the width got reduced by 30 mm and depth by 20 mm which means less volume. To make this possible the inner layout had to be changed (pictures will follow when model is...

I've bought Lenovo M73 with an i5-4670 and 8gb RAM (which cost cost me only 140$). So, now I want to put inside some graphics to able to play games in 1080p. The PSU is 240W. Could you guys help me with the choice, the options are: -to buy GTX 1050ti 4GB Low Profile -to buy GTX 1060 6GB mini...

New edition coming 3D size：213(L)*215(H)*121(W)=5.59L Hardware support specification： Motherboard: 17*17 ITX Standard Version (do not recommend the motherboard with the power supply board and PCH heat dissipation motherboard) Power supply: FLEX long limit, 150mm wide limit...

So.. after trying to design my own case from scratch.. and many a day of feeling 105% full retard I literally threw one of my notebooks in a firepit. And decided I'm building my pc inside a fat .50 ammo can. Measured out a standard .50cal and it was 'just' too small to comfortably build in it...

This zip file contains all of the necessary DXF files (for laser cutting), STEP files (for modifying), and STL files (for 3d printing) to make your own monolith, or even customize it to your liking (add new vents, increase the case size, etc.) I'm working on a fully fledged google Doc that...

Hey guys, I've got some ideas rolling around in my head for an SFF case around the size of the Xbox One. I've come across the HDPlex 300 and ordered one along with one of their 300W internal bricks. After doing some more research, I cam across this AC-DC converter PFM4414VB6M24D0C00. I browsed...

On this site there are many different cases that have been made or reviewed but to find the one you want it can be hard so I would like this thread to be purely about cases for SFF. For example somebody could post the dancase a4 and give some specs about it along with some images (images are...

Hello SFFF, I have been lurking around the SFF world for a couple weeks and have decided to pull the trigger and build my own system. As the title suggests I have decided to build inside of the GEEEK A20 case that is coming out soon and would like some advice on what I have so far. The purpose...

Hello all, I am looking to build in the smallest case possible without changing any of the current parts that I own. In other words, I can't use the S4 Mini because it would require me getting a new PSU. Here is what I am working with Processor: Intel i5 6600k MOBO: Gigabyte Gaming 5 z170n GPU...

Hello all, I just put together a low power AM1 Kabini based build for a buddy. He will run this headless with a Linux distro for his internet radio station. It is set up to be always on and so low power and low cost was the aim. I have used the Asrock AM1H-itx mobo that has a built in power...

The holy grail of cases for me would be an itx mobo, 280 mm radiator support for a custom loop with a dual slot graphics card, SFX PSU, and an ODD of any kind. Minimum one 2.5 in drive slot, audio/USB 3.0 front panel. The real question: what is the smallest case I can get with all of this?

Thanks for spending the time reading all of that! I appreciate every critiques or comments, so don't be afraid to do so!

Hi Everyone, What are your thoughts on us seeing a slew of smaller or at least more creatively small SFF cases after the release of Pascal GPUs? Since HBM2 is going to shrink the size of Nvidia's top of the line cards (let's hope) to about the size of the Fury X (7.5 in. or 190mm) or Fury Nano...

"Quite a few major manufacturers are now developing new mITX cases, which is great news, in and of itself – but a lot of these cases seem to be ignoring the “small” in small form factor. For example, the Fractal Design Node 202 and Silverstone RVZ02 do a good job of cutting some lbs. compared to...