amd

I bought this case when it released, absolutely love the look. Unfortunately the GPU ventilation is terrible; anything over a 3060/6600 level card overheats. I just recently got comfortable enough with custom loops to make this build work. The tempered glass is hinged on either side like doors...

Contains some of the copper-layers and laminate of the substrate (pcb, kinda'), as well as the IHS, solder-points and pin-legs. The goal is to add the chiplets and the smd-components later on. Issues: Height of IHS Length of pins Thickness of substrate Since I don't own the CPU, these are...

Moving out of country. Selling a lot of hardware. Local pickup is preferred but shipping within the US is fine if you want to cover the shipping costs. Included in the sale: Ryzen 3900X w/ polished ihs and original box

I sell my unique small workstation! Barely used! NFC System S4Tiny Case with box, etc. ASRock X300TN-ITX ThinITX (Support AMD 5700G as well - All cables included) AMD Ryzen 5700G Crucial Ballistix 32GB DDR3200MHz Memory Crucial P5 NVME SSD 500GB BlackRidge CPU Cooler HDPlex 400W 2.0 (Samsung...

I am selling my own PERFECT workstation: AMD Ryzen 3900X 12 Core + BOX NVIDIA MSI Aero ITX 2070 + BOX Gigabyte X570 ITX Motherboard + BOX Samsung SSD 970 Evo Plus 512GB G-Skill 32GB 2x16GB 3200MHz C14 Samsung B-Die Noctua L12S + Noctua A12x15 Chromax Noctua A9x14 Chromax Corsair PSU SFX SF600 +...

I saw this post on Video Cardz today and noticed that an AMD video shows a single fan GPU (AMD teases mid-range and mainstream Radeon RX 6000 graphics card series - VideoCardz.com). This might be the first GPU from the new generations that will fit into a Velka 3 (175mm in length). Release 1st...

I saw this post on Video Cardz today and noticed that an AMD video shows a single fan GPU (AMD teases mid-range and mainstream Radeon RX 6000 graphics card series - VideoCardz.com). This might be the first GPU from the new generations that will fit into a Velka 3 (175mm in length). Release 1st...

Hi Guys, First AMD build here, going with a Ryzen 5 3400G on a Gigabyte B450I AEORUS. Looking at what RAM to add, the motherboard is supposed to run up to 3600MHz memory modules in overclocked mode. So I was about to buy some 2x 16GB Patriot Viper4 3200MHZ / CL16 modules (~$110) when I saw the...

Optimum Tech checked a number of ITX cases for compatibility with the reference 6800XT. Fits: Cooler Master NR200 Streacom DA2 NZXT H1 NCASE M1 FormD T1 (In 3 slot mode) Century 2.0 Does not Fit: FormD T1 (In 2 slot mode) Loque Ghost S1 Dan A4-SFX I'm going to be air cooling my T1 when it...

Did anybody else catch AMD referring to mini-ITX as "MICRO ITX" at 12:45 in their platform video? I know many people make this mistake, but you'd think a major component manufacturer would know better than to flub a major form factor.

Selling some computer parts to downsize my main build. These are all in used or like new condition. The prices exclude shipping (unless stated otherwise), and I can only ship to the US for now. I'm planning on parting away with my Intel setup (plus with an integrated GPU so I can do test builds...

https://www.asrock.com/Graphics-Card/AMD/Radeon%20RX%205500%20XT%20Challenger%20ITX%208G/ It seems to be a good 5500XT mini ITX card. Did anyone tried it out/bought it? Where can we buy it?

Hey Guys, This is the second time posting here on sffnetwork. I wanted to share my project of watercooling a Fractal design node 202 with a dual 240 mm radiator loop. Here is the parts list: Case: node 202 Psu: corsair sf600 platinum Cpu: ryzen 3700x Gpu:1080ti Mobo: Aorus x570 pro wifi...

I'm wondering if there are better (i.e. faster / quieter) options for fans out there that maybe I'm not aware of? I did my best to compare. Open to any suggestions about anything, not just fans :p This was my first post (everyone was super helpful)...

Started my quest by twisting some wire fencing together to form some wire "rods" and JB welding them into a frame. I liked the result, but it needed some refining.. and I wanted to go SMALLER. Bought some 1/2" aluminum angle rods from Lowes and started putting together a frame with more or less...

I'm just waiting on some much needed BIOS updates from AMD but overall I am very pleased to see it come to life. Huge thanks go to @KSliger for making this custom SM550, you and your team did a fantastic job. I couldn't be more pleased with how it turned out.

I'm building an Mini-ITX Ryzen build. Starting with a Ryzen 5 2600, Due to the video editing/processing use of this build I need a clear upgrade path into the top of the line Ryzen processors as Ryzen prices drop and resources allow. What Mini-ITX MBs can support the current Ryzen series from...

I am starting a new build in the Caselabs S3. This will be a long and slow one as I will be utilizing the new AMD 3950x 16 core and most likely the 2080Ti SUPER. So, as I wait for the main components to release it will be a lot of mock up and prep work. A long story about the case. I originally...

Interesting idea about a motherboard with no chipset from Buildzoid

Building a new pc again, after using a laptop for a while, looking to build a PC for light gaming nothing hardcore. Not decided on amd or Intel yet but wondering what the best budget mini itx board out there at the moment. Any suggestions.