Hi guys, long time no see. I am back with a new version of my small form factor ATX case, this time it is this a 3D render, but I will start making a prototype in a week or so :)
The case measures H37.1 cm x D36.6 cm x W13.6 cm = 18.467 liter. So just under 18.5 liter. This case is a little...
Near new, used for measurements, never actually installed or turned on. Comes with box and accessories.
I bought these from Newegg for measurements, then the company sent me a set, so now I have duplicate sets, hoping to find them new owner.
Free shipping included for US. Will not ship...
Hi my dudes and dudettes!
I'm about to build a new PC, and I wan't to use the Louqe Ghost cabinet (if I can get hold of it, that is). I also plan to get a top hat for CPU cooling going Ryzen). I have a couple of questions:
1. Due to the Loque having space for only a 40 mm ish GPU, I'm forced...
So my Dan case arrived and I decided I would copy one of the pictures from the case thread with an hdplex, 120 aio, and full size gpu.
Here's my current parts list, 90% of the parts were already bought for a node 202 which are now in the Dan A4:
CPU: AMD - Ryzen 5 1600 3.2GHz 6-Core Processor...
Hello there,
I just joined the community today after spectating for quite a while. I have a general fit question for AIO CPU coolers in the Silverstone Sugo SG13 WB-Q. Has anyone attempted putting the NZXT Kraken X42 or the Deepcool CAPTAIN 120EX in this case?
My concerns are-
- NZXT 140mm...
TLDR: Anyone using a fan arrangement other than intake on bottom, exhaust on top, for the Evolv Shift case with dual AIOs?
Parts list here: https://pcpartpicker.com/user/grimmwrath/saved/#view=bJfzMp .
As anyone that's built in an Evolv Shift knows, the airflow is severely limited, and temps...
It finally arrived! So it's time for an upgrade to the beautiful DAN A4-SFX v3 case.
My old rig can be found here:
https://smallformfactor.net/forum/threads/elite-110-thermal-images-i5-7600k-gtx-1060-hdplex-power.5889/#post-88235
The new one is basically a transplant of the internals into the...
Hi all,
So im busy with setting up a test bench to test delitting on different 115x cpus with Thermal Grizzlys Conductenaut and the RocketCool custom Copper IHS.
Now for testing I bought a Asetek 545LC directly from their shop. But it has some damage to the fins in the rad. Now I don't know if...
This will be my first build since joining the SFF community. I purchased this wonderful case a couple weeks after joining and finally found the time and resources to complete this one out. It was a challenge to build in but very fun as well. This is the Salvo 400 built by @grsychckn. Despite...
New to the forum. First forum I have ever joined.
Names Ally and I'm from Scotland;)
Not the best pics of the build but here are the specs
Cerberus matx case Slate grey (side panel with window on its way)
ASUS ROG MAXIMUS GENE Viii motherboard Sli enabled
i5-6500k cpu
AIO cooler Aigo 120mm...
Hi All,
Welcome to the updated version of ]M[ casing:
the casing is modular in a way that it can change its capabilities by housing not only an itx MB but also a Micro-ATX and also occupying dual full-length GPUs in an 11.8 Liter size (a first I believe):
the sizes that this case can...
Introduction:
I started to design my dream case. Project Vertical is a 19.9L mATX case with a small footprint, optimized for high-end hardware, excellent cooling and silent operation. An optional 15.6 inch touch-display makes the case more useful when standing on the desk.
Mainboard and...
I want to start this off by saying that I realize this idea is highly impractical. Many AIOs use non-standard motherboard form factors, many have few to no standard sata connectors, awkwardly placed ports, and good luck finding them with standard power connectors. But every now and then you see...
Hi all, just bought Cougar QBX, and loving the build quality of this compact case. I wanted to install a closed loop AIO, but it seems I'm having difficulty with the tubes. I'm using Deepcool Captain 120EX, and outright, the tubes are too rigid to properly close the side panel. I can force it...
This is a nice little bracket that will allow you to mount your Asetek style pump to a AMD or Nvidia GPU. The log can be found here for more information.
The bracket works by sandwiching the pump head of the AIO and the GPU die together via 4 screws and two brackets (one that holds the AIO...
Well the title sums it all up. I'm gonna install a 120mm AIO cooler in the sentry kind of like that guy on the BITWIT youtube channel did with his Node 202 with great results. This idea was mentioned on hardware forum but I never saw anything of it. I'm gonna try a couple of different options as...
Hey guys!
I'm excited to join the SSF club! I've just bought myself a NCase M1 and I was looking at AIO water cooling kits and I was wondering if the NZXT Kraken X52 would fit in this small case...
I'll be running~~
Case: NCase M1 V5
Mobo: Gigabyte AB350N-Gaming Mini-ITX
CPU: Ryzen 7 1700...
so, i'm working on a case and would would like to include compitability with the 92mm aio from asetek. But i can't seem to find any measurments or 3d models, so my question now is: does anyone have or have acces to one and if so could you share them with me? I'd need all measurment shown on the...