News

GPD’s MicroPC 2 Now Powered by Intel’s Core 3 N350

GPD’s MicroPC, one of the better options if you’re looking for a pre-built cyberdeck-esque device, has now been upgraded, with help from an Intel Core 3 N350. Previously, the unit came with either an Intel N250 or Core i3-N300. This upgrade brings a 100MHz increase to the boost clock over the Core i3-N300, with a 0.1GHz boost in the integrated graphics clocks.

Because we love a good data table, here’s a quick rundown on the processor differences (eschewing some data that is the same across all 3, data sourced from Intel);

Intel Processor N250 Intel Core i3-N300 Intel Core 3 N350
Architecture Twin Lake Alder Lake-N Twin Lake
Core Config 4C 4T 8C 8T 8C 8T
TDP (Base Power) 6 W 7 W 7 W
Max Turbo Frequency 3.8 GHz 3.8 GHz 3.9 GHz
Cache 6 MB Intel Smart Cache 6 MB Intel Smart Cache 6 MB Intel Smart Cache
Max Memory Support 16 GB LPDDR5 4800 MT/s 16 GB LPDDR5 4800 MT/s 16 GB LPDDR5 4800 MT/s
GPU Name Intel Graphics Intel UHD Graphics Intel Graphics
GPU Max Dynamic Frequency 1.25 GHz 1.25 GHz 1.35 GHz

The display remains the same, a 7″ 1920 x 1080 LTPS touchscreen running at 60Hz. Brightness is reported at 500 nits. The MicroPC 2 is still around 490 grams, and measures in at an itty bitty 171.2 × 110.8 × 23.5 mm (0.45 Litres).

Storage can be selected at time of purchase, with between a 512 GB to a 4TB PCIe 3.0 2280 drive depending on your budget, and with Windows 11 Home pre-installed. 8 TB drives are supported, but you’ll have to bring your own to the party.

Networking is in the form of WiFi 6, Bluetooth 5.2, or a 2.5Gbps RJ45 ethernet port for when you really need to jack into the matrix. A pair of USB 3.2 Gen 2 Type-A ports, two USB-C ports, a HDMI 2.1 port, a 3.5mm headphone & mic combo jack and a microSD reader round out connectivity. Power is supplied internally with a 27.5 Wh battery, which can be re-juiced with 45w USB-PD charging.

Prices start at US$730 for the i3-N300 model with 512 TB storage and 16GB RAM, and can roll all the way up to US$1273 for a max spec Core 3 N350/ 16GB RAM / 4 TB storage model.

 

Source: VideoCardz

GPD’s MicroPC, one of the better options if you’re looking for a pre-built cyberdeck-esque device, has now been upgraded, with help from an Intel Core 3 N350. Previously, the unit came with either an Intel N250 or Core i3-N300. This upgrade brings a 100MHz increase to the boost clock over the Core i3-N300, with a 0.1GHz boost in the integrated graphics clocks.
Because we love a good data table, here’s a quick rundown on the processor differences (eschewing some data that is the same across all 3, data sourced from Intel);




Intel Processor N250
Intel Core i3-N300
Intel Core 3 N350


Architecture
Twin Lake
Alder Lake-N
Twin Lake


Core Config
4C 4T
8C 8T
8C 8T


TDP (Base Power)
6 W
7 W
7 W


Max Turbo Frequency
3.8 GHz
3.8 GHz
3.9 GHz


Cache
6 MB Intel Smart Cache
6 MB Intel Smart Cache
6 MB Intel Smart Cache


Max Memory Support
16 GB LPDDR5 4800 MT/s
16 GB LPDDR5 4800 MT/s
16 GB LPDDR5 4800 MT/s


GPU Name...

Continue reading...


I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it. I don't need it.
 
  • Like
Reactions: SFFMunkee

Revenant

Christopher Moine - Senior Editor SFF.N
SFFn Staff
Apr 21, 2017
1,799
2,903
USA
That things screams wacky Sony 90s or early 2K VAIO laptop line, or something from the 80s. Love the design of it.

That said, the processor interests me too. 7-watts for 8 Gracemount cores seems like it could make for some decent sub-1L emulation gaming and basic Linux workstation machines. It also reminds me of the Jaguar core form AMD which was surprisingly successful.