Build/Design Log (resources here: https://smallformfactor.net/forum/threads/wip-55mm-high-itx-pio-case-3d-print-sheet.19278/ )
Printable on 220mm build plate. Use sheet stock or Mesh panels for top and bottom. ( painted steel mesh 'Gutter guard' is available for $3-$5 in black or white from hardware store in 6"x36" lengths, roughly 2mm thickness. It may be possible to use for some panels with a little work.)
55-60mm Z height (55mm internal, ~60mm external depending on stock chosen).
Width 250mm(10"), Depth 200mm (8").
Parts I am using:
JinWei H610i-PIO https://www.jwipc.com/products/power-graphics-h610i-p/
55mm high round aluminum M3 Standoffs. https://www.aliexpress.us/item/3256803337647492.html
Heat Set Brass inserts 3mm Amazon: B0CC4S7W1S
Gigabyte 4060 OC Low Profile
Dell/Alienware 240W brick.
Printable on 220mm build plate. Use sheet stock or Mesh panels for top and bottom. ( painted steel mesh 'Gutter guard' is available for $3-$5 in black or white from hardware store in 6"x36" lengths, roughly 2mm thickness. It may be possible to use for some panels with a little work.)
55-60mm Z height (55mm internal, ~60mm external depending on stock chosen).
Width 250mm(10"), Depth 200mm (8").
Parts I am using:
JinWei H610i-PIO https://www.jwipc.com/products/power-graphics-h610i-p/
55mm high round aluminum M3 Standoffs. https://www.aliexpress.us/item/3256803337647492.html
Heat Set Brass inserts 3mm Amazon: B0CC4S7W1S
Gigabyte 4060 OC Low Profile
Dell/Alienware 240W brick.
Last edited: