Production SteamTrain Overachiever: 70mm CPU cooler, Zotac mini, 600W PSU in 5.32L; 3D printable

[ZMan]

Height: 182mm
Width: 134mm
Depth: 218mm
Case Volume: 5.32L
Case Weight: 250g
Total system weight 3.5kg
(e.g.: FSP500-50FDB, Zotac GTX 1080 ti mini, Noctua L12S, Asus z270-i, Intel Core i7 - 7700K)

CPU cooler up to 72mm (e.g. Noctua NH-L12S)
GPU max length 212mm (e.g. Zotac GTX 1080 ti mini)
PSU FlexATX up to 600W (e.g.ENP-7660B)

Have you ever wondered how tight and light a pretty powerful machine can be?
Check the pictures:

3D printable .stl files are now available for download on my Patreon page.

 

[XnovaFR]

Hello,

Do you plan to sell it? I mean, I don't have 3D printer...

 

[ZMan]

Do you plan to sell it? I mean, I don't have 3D printer...

No, I do not plan to print and ship. For a number of reasons.

You have a few other options:
1. Get a 3D printer. The case is designed to be printed on small cheap printer. There are printers with 220 x 220 build plate for less than $175.
2. Find a print service near you.

 

[dealda]

How are the temps under Load?

 

[ZMan]

How are the temps under Load?

After 15 min Furmark + CPU burner -
The i7-7700K 150W 87C max . The CPU fan is at auto. Too lazy to change settings.
THe Zotac GTX 1080ti mini - 262W 74C max. Fan went to 94%.
During normal gaming - all graphic settings on Ultra - 60C on both.

 

[Engr62]

Height: 182mm
Width: 134mm
Depth: 218mm
Case Volume: 5.32L
Case Weight: 250g
Total system weight 3.5kg
(e.g.: FSP500-50FDB, Zotac GTX 1080 ti mini, Noctua L12S, Asus z370-i, Intel Core i7 - 7700K)

Very nice job on the case! How long did it take to print?

Also, I didn't know a z370-i could run an i7-7700K. I thought z370 could only handle 8th and 9th gen.

 

[nabuca]

Do you have and idea/estimate what printing this case with a print service would cost?

 

[ZMan]

Very nice job on the case! How long did it take to print?

Also, I didn't know a z370-i could run an i7-7700K. I thought z370 could only handle 8th and 9th gen.

Thanks.
Printing time depends on print quality, printer, material. Fine quality on my Cr-10 with PLA it took about 2 days.

oops typo, Z270-i

 

[ZMan]

Do you have and idea/estimate what printing this case with a print service would cost?

Best offer from print service I got was $100.
Once you have a printer it cost about $10

 

[wesbl]

Man I didn't see this post! It's another masterpiece!
I think that with a 90 degree power cord could be very nice!