Accessory Review - INTEHILL 1920×1200 portable 8.9" USB-C Touchscreen - supports HDR and FreeSync

REVOCCASES

Shrink Ray Wielder
Silver Supporter
Apr 2, 2020
2,256
3,694
Germany / HK
www.revoccases.com
My old portable monitor broke, so I was looking for some alternative... Finally decided to go really SFF and got a 8.9" USB-C Touchscreen from INTEHILL.

Technical Data:
  • IPS screen with 1920×1200 resolution, 60Hz
  • HDR Support
  • AMD FreeSync Support (48 ~ 60Hz)
  • Input: 1x mini-HDMI, 2x USB-C
  • 10 point touchscreen
  • VESA 75mm mounting holes
  • stereo speakers
  • 211 x 143 x 9.5 mm size
Size comparison:

AIMG_20210325_1146407.jpg


The monitor comes with: manual, carbon fiber optic cover/stand, USB-C to C cable, USB-A to C cable, mini HDMI to HDMI cable, AC adapter

IMG_20210325_1126230.jpg


The chassis is made from brushed, black anodized aluminum

IMG_20210325_1127018.jpg


perfect fit for a small portable setup with a 230W TaoBao GAN adapter:

IMG_20210325_1132242.jpg


My impressions so far...

PRO
  • small and lightweight
  • great picture quality and pretty good brightness for that size
  • PD and DP over Type-C, so I only need to pack one cable
  • good build quality, no chemical smell from the protection cover

CON
  • FreeSync only via HDMI
  • getting the native resolution (1920×1200) to work via Type-C is a bit tricky (HDMI works fine though):
    you need to use a better cable and manually setting up 1920×1200 as custom resolution in your GPU control panel
  • speaker quality, well...

More info and product links:


 
Last edited:

Ricky Zeng

Trash Compacter
Jun 10, 2020
42
36
My old portable monitor broke, so I was looking for some alternative... Finally decided to go really SFF and got a 8.9" USB-C Touchscreen from INTEHILL.

Technical Data:
  • IPS screen with 1920×1200 resolution, 60Hz
  • HDR Support
  • AMD FreeSync Support (48 ~ 60Hz)
  • Input: 1x mini-HDMI, 2x USB-C
  • 10 point touchscreen
  • VESA 75mm mounting holes
  • stereo speakers
  • 211 x 143 x 9.5 mm size
Size comparison:

AIMG_20210325_1146407.jpg


The monitor comes with: manual, carbon fiber optic cover/stand, USB-C to C cable, USB-A to C cable, mini HDMI to HDMI cable, AC adapter

IMG_20210325_1126230.jpg


The chassis is made from brushed, black anodized aluminum

IMG_20210325_1127018.jpg


perfect fit for a small portable setup with a 230W TaoBao GAN adapter:

IMG_20210325_1132242.jpg


My impressions so far...

PRO
  • small and lightweight
  • great picture quality and pretty good brightness for that size
  • PD and DP over Type-C, so I only need to pack one cable
  • good build quality, no chemical smell from the protection cover

CON
  • FreeSync only via HDMI
  • getting the native resolution (1920×1200) to work via Type-C is a bit tricky (HDMI works fine though):
    you need to use a better cable and manually setting up 1920×1200 as custom resolution in your GPU control panel
  • speaker quality, well...

More info and product links:


Nice Hades Canyon setup. Could you share a link for the aftermarket power adaptor from Taobao? I noticed it's much smaller than the OE adaptor. Is the adaptor any good to handle reasonably heavy load, e.g. 3D gaming / CAD modeling? Hades Canyon is quite power hungry for an NUC.
 

REVOCCASES

Shrink Ray Wielder
Silver Supporter
Apr 2, 2020
2,256
3,694
Germany / HK
www.revoccases.com
Nice Hades Canyon setup. Could you share a link for the aftermarket power adaptor from Taobao? I noticed it's much smaller than the OE adaptor. Is the adaptor any good to handle reasonably heavy load, e.g. 3D gaming / CAD modeling? Hades Canyon is quite power hungry for an NUC.

Here you go:


The Hades Canyon draws about 180 ~ 200W under full load (p95 & furmark combined). I have no long term experience with this adapter yet but didn't experience any issues so far.

Some impressions...

Pro:
  • less than half the size of a typical 230W brick
  • uses 4 real GAN Chips
  • real 230/240W output, OCP will kick in over 240W
IMG_20210315_2222093.jpg


Con:
  • DC cable is too thin for my taste, I would have preferred 14AWG or better
  • "only" 94% efficiency, a well optimized design could do better
  • like all GAN chargers, it gets quite toasty under high load
  • actual output voltage is 20.30VDC (not 19.5) and will drop to 19.8VDC at the barrel connector under load (because of the cable resistance)
unknown-8.png


unknown-7.png


unknown-6.png
 
Last edited:
  • Like
Reactions: Bizanti

Ricky Zeng

Trash Compacter
Jun 10, 2020
42
36
Here you go:


The Hades Canyon draws about 180 ~ 200W under full load (p95 & furmark combined). I have no long term experience with this adapter yet but didn't experience any issues so far.

Some impressions...

Pro:
  • less than half the size of a typical 230W brick
  • uses 4 real GAN Chips
  • real 230/240W output, OCP will kick in over 240W
IMG_20210315_2222093.jpg


Con:
  • DC cable is too thin for my taste, I would have preferred 14AWG or better
  • "only" 94% efficiency, a well optimized design could do better
  • like all GAN chargers, it gets quite toasty under high load
  • actual output voltage is 20.30VDC (not 19.5) and will drop to 19.8VDC at the barrel connector under load (because of the cable resistance)
unknown-8.png


unknown-7.png


unknown-6.png
Seems legit. Been looking for a good higher wattage DC adaptor. Thank you~
 

Nichronos

SFF Lingo Aficionado
Jun 22, 2018
129
66
Try the Nexdock touch, it has its own integrated keyboard and both USB-C DisplayPort and HDMI inputs!

332278.036495681836e27a13e972874e99f10d.1600.jpg