Reverse Ncase Power Cable

[Soulforger90]

Just curious if SFFlabs (or someone else) sells the Ncase m1 V6 internal power cord in reverse from the stock one?

My build has the PSU (SF600 platinum) turned against the front of the case, so the powercord attaches on the right side of the case. This is doable with a little planning as you use to bend the power cable down since it won't clear the tab for the side panel. It's just a really tight bend. I figured they would offer a cord with a different orientation to the right so you don't have to bend the cable.

Thanks

 

[Maz]

They used to. Not currently in stock, but may come back:

I've sent w360 a message about restocking the power cables on SFFLab, but as yet he hasn't gotten back to me.

In the meantime, perhaps try this workaround?

 

[Soulforger90]

Thanks Maz,

That's the workaround I was doing. And it does work, it's just really tight on the power cord side. So hopefully they will release the power cables again.

 

[Hixbot]

I'm in the same predicament. Actually right angle left isn't ideal either, "right angle up" towards the back of the case would be best. Like this image.

 

[HyperActive]

How about this adapter?

US $4.29 |Right Angled IEC Adapter, Up Angled IEC 320 C14 to C13 for LCD/LEC TV Wall Mount Black|Plug With Socket|Consumer Electronics - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

s.click.aliexpress.com

 

[Hixbot]

you could use that adapter (although it might be too tall to fit under the case top panel). but if you connect the existing internal power cable provided by ncase, you will still have the undesired right angle connected to the adapter.
the best thing would be a custom internal power cable with "up angle".

 

[Hixbot]

My plan is to buy this and this, and splice them together at the exact length I need.

 

[knewt]

@Necere Any news on the reverse cable? And also the locking plastic thing for the side panels? Im waiting to order these spare parts!

Should I contact sfflabs and ask them?

 

[Necere]

@Necere Any news on the reverse cable? And also the locking plastic thing for the side panels? Im waiting to order these spare parts!

Should I contact sfflabs and ask them?

I don't know if or when SFFLab will stock parts again, but sure you can contact them to ask.

 

[xSDMx]

I ordered this as a replacement. Should hopefully arrive within a week. Will update folks re: fitment and quality.

 

[Soulforger90]

I asked Phil over at pslatecustoms about making an internal extension cable and he posted that same link. Let us know how those work. My understanding is that the user has to plug in the wires to the adapter, so make sure it's done correctly. lol.

 

[gwertheim]

I ordered this as a replacement. Should hopefully arrive within a week. Will update folks re: fitment and quality.

What length cable did you get and have you been able to find it on AliExpress?

 

[Windeh]

This is 45mm:

 

[Soulforger90]

That looks good. Does the power switch on the PSU interfere with the cables? Other than that it looks really clean.

 

[Windeh]

That looks good. Does the power switch on the PSU interfere with the cables? Other than that it looks really clean.

The cable is a good 5mm away from the power switch.

 

[Amonchakai]

I ordered this as a replacement. Should hopefully arrive within a week. Will update folks re: fitment and quality.

Did someone found it on Amazon / eBay /aliexpress?

I cannot use the cable provided with the case as the side screwed to the case conflict with the CPU Cooler. That cable seems less rigid and would solve my issue.

 

[Soulforger90]

Not sure how often Ncases.com is going to carry the right angled power cable, but I ordered one on there for $15. It's in transit, but I'm excited.

 

[Amonchakai]

Am I blind? I don't see it on the store.

In the end, I managed to use the cable shipped with the case. I used the middle whole of the back of the case, and bent very firmly the power cable at the other end to connect it to the PSU. (as other person reported on the forum)

That will do the trick while I am looking for a better solution. It is a quite simple cable, so I think I may DIY one. Just need to find the connectors. And I may use that opportunity to experiment sleeving cables

 

[Soulforger90]

I have my PSU in the ATX position because I wanted to use the 140mm fan that came with the Noctua C14s. The PSU cable has to be bent downward in order to get it to fit. I also used the middle cutout for the external plug.

I don't see the right angle plugs on the site anymore, I checked last night. But they were up there at some point. Hopefully they will be up there again.

 

[JoShmo]

The v6.1 reverse style power cable order arrived a few days ago. Thanks ncase! The original was giving me OCD being bent around like that.