Raised side panel

[bran]

I placed my NH-D15 in a Cerberus X today just to see exactly how much additional clearance it needs to use the D15 in a Cerberus. It looks like it would only need less than another 10mm in order to completely clear the D15 and the stock fan of the D15. This led me into thinking maybe I can buy a spare side panel and cut it up to allow the D15 to sit. But then I remember my terrible modding skills, or lack, thereof.


I wonder if Sliger can and would be interested in manufacturing a raised side panel so that 16X mm premium air coolers become compatible with the Cerberus(X)


Some examples:

raised mesh:

raised plexi:

raised corsair:

 

[KSliger]

We get asked about this all the time, you will want to look into "male to female 6-32 threaded hex standoffs".

Will need to unthread the ballstuds from the panels, install the spacers, then thread the ballstud back onto the spacer.

So long as you are not going > 1" long spacers, the panel will not look too bad.

Here's Mouser for reference: https://www.mouser.com/Electromecha...s/_/N-aictf?P=1z0juk9Z1z0z2i9Z1yzdsmgZ1yzu5j9