Is there any compatibility problem for sx800-lti&X299 ITX&1080TI FE?

[jack1940]

Is there any compatibility problem for SilverStone SX800-LTI 800W, SFX-L power & X299 ITX & 1080TI FE & Ncase M1(mainly installation)?

My card is GIGABYTE 1080ti turbo, similar to 1080ti FE.

Thank you

https://www.amazon.com/dp/B01NALZ89C/?tag=theminutiae-20

https://www.amazon.com/dp/B07317Q3RJ/?tag=theminutiae-20

https://www.amazon.com/dp/B06XH5ZCLP/?tag=theminutiae-20

 

[rfarmer]

The problem comes from how close the PSU is to the GPU which leaves very little room for the cables. It is doable but may push on your GPU causing it to sag.

 

[jack1940]

The problem comes from how close the PSU is to the GPU which leaves very little room for the cables. It is doable but may push on your GPU causing it to sag.

Thank you for reminding me.This is really a problem, but I am more concerned about the compatibility of the PCB panel and power on the left side.

 

[rfarmer]

That I can't answer. Take a look through the build log section, I know there are a few x299 builds in the Ncase.

 

[jack1940]

There is a SX700-PT (SFX) at this year's exhibition, but there is no specific information now.

 

[Soules]

Would the atx mount and an additional atx to sfx adapter plate of set the cables enough?