HDPLEX 500W GaN AIO ATX Power Supply
Free Shipping Worldwide Stock Status USA : In Stock Germany : In stock Asia : In Stock UK : In Stock
hdplex.com
It's finally here!
@Revenant
I thought it was weirdly restricted too.Wanna know how that fan sounds....
The footprint, price and advantages are starting to be pretty nil at this point though, compared to an SFX unit. There's now an integrated fan, and 2 of these is pretty bulky. But hey, certainly someone will make it workCurious to see if anyone ends up trying the 1000W combo.
HDplex 250w do not have load balancing, so their outputs should never be paralleled into a gpu's pci cables. The sync function is simply a relay of ps_on signal to boot up the second one at the same time. They do not communicate voltage or load with each other in any way. What you could do though is use a molex pin remover and remove one of the adapter's 8-pin inputs and replace it with an 8-pin EPS housing (which has 1 less GND so have to daisy chain one of the Sense wires). Then a single 250w gan could just power the 12vhpwrIs there any way of using this power supply in a build with GPU with a 16-pin power connector (12VHPWR)? For example, the relatively small MSI 4070 Ti Ventus 2X.
I suppose the obvious alternative is daisy chained 250W GaN HDPlex and using one of the octopus 2x 8pin to 16 pin adapters.
Thanks, this is helpful. I figured it would make sense to dedicate one 250W to the GPU.HDplex 250w do not have load balancing, so their outputs should never be paralleled into a gpu's pci cables. The sync function is simply a relay of ps_on signal to boot up the second one at the same time. They do not communicate voltage or load with each other in any way. What you could do though is use a molex pin remover and remove one of the adapter's 8-pin inputs and replace it with an 8-pin EPS housing (which has 1 less GND so have to daisy chain one of the Sense wires). Then a single 250w gan could just power the 12vhpwr