GPU GPU fan connector (EVGA 3090,3080,3070) (JM4, JM5)

Apotessar

Cable Smoosher
Aug 1, 2020
12
10
Hello together
For a circuit to switch off the fan externally, I need a connector for the EVGA GPU fan header. I tried a few others I had at home, but EVGA seems to use a different connector.
(https://forums.evga.com/FindPost/3208471 as seen here, the blue one)
(or here Imgur: The magic of the Internet)





Can anyone tell me which plug and connector to use to make some sort of extension cable? I am almost certain that the plug must be a JST ZE. However, the socket seems to look different from the ZE connector data sheet.

Thx for your suggestions
 
Last edited:

Phuncz

Lord of the Boards
SFFn Staff
May 9, 2015
6,124
5,032
Belgium
Most GPUs use a JST-PH connector:

1625412431665.png


Unsure if this is the correct one, difficult to see with the small image in the link you provided.
 
  • Like
Reactions: Apotessar

Apotessar

Cable Smoosher
Aug 1, 2020
12
10
Unsure if this is the correct one, difficult to see with the small image in the link you provided.
Yes, not a good picture. I took a recent picture of my graphics card (added to the 1. post).
I still had a JST-PH connector lying around. Unfortunately, it does not fit.
 

Phuncz

Lord of the Boards
SFFn Staff
May 9, 2015
6,124
5,032
Belgium
Ah yes, your picture indeed shows a different connector than the JST-PH. I'm not sure which this is though, generally GPUs use the same one, luckily.
 

BaK

King of Cable Management
Bronze Supporter
May 17, 2016
985
973
Switzerland
According to this thread: https://forums.evga.com/Which-fan-header-is-used-on-3080-FTW3-m3191712.aspx
This could be an
Yeonho SMH200-NN 4 pins

HTB1mn5sXffsK1RjSszbq6AqBXXaZ.jpg


-> https://www.alibaba.com/product-detail/yeonho-SMH200-04-4-pin-plastic_60870310448.html
 

Apotessar

Cable Smoosher
Aug 1, 2020
12
10
That is certainly the right direction. I found some others on Aliexpress that should also fit. A few of them were available in small units.
A few are on their way to me now. The connector I am most hopeful about is this one:

When the goods arrive I will be sure to share my experience with the connector.
 

Apotessar

Cable Smoosher
Aug 1, 2020
12
10
That is certainly the right direction. I found some others on Aliexpress that should also fit. A few of them were available in small units.
A few are on their way to me now. The connector I am most hopeful about is this one:

When the goods arrive I will be sure to share my experience with the connector.
I can confirm that the linked HY-4A and/or HY-4Y connectors fit the EVGA GPU fan connector. 👍
 
  • Like
Reactions: BaK