So first time putting together a buildup of a computer rig but here it goes
Case: Enermax Steelwing in black/red
Motherboard: Asus B350M-A
Cpu: AMD Ryzen 1700 oc 3.3ghz
Cpu Cooler: Wraith Spire (fan rotated 90 degrees so amd logo is pointing up)
Gpu: Asus AMD R9 Fury Nano 4gb White
Ram: x2 G. Skill 8GB NT Series 2400mhz (running at 2133mhz won't post at 2400mhz)
HDD: WD black 750gb
SSD: Toshiba-TR150 120gb
PSU: Silverstone SFX 600watt
Some additional things
Added a evercool slim 80mm fan into the top fan grill to act as active exhaust
Had to use a old 3.5" to 2.5" adapter to fit my hard drives into the case due to the HDD actually resting against the usb2.0 header on the board which I"m pretty sure would cause a short! o.o
Using sliverstone slim sata cables to the hard drives right now to though I should look into re working the cable management on that at a later time
Anywho without further ado some pictures of the build being put together and some pictures showing some random ideas on psu relocation.
Mobo installed
random moc up on front mounted PSU with a 120 below and a slim 120 over the top exhaust (know the 120 is wasted on the top just for heck of it)
Seeing how much close the psu would fit with the stock fan bracket in the case... would need to be notched 5-7mms for clearance then it would drop in and rest next to the motherboard also room above for a right angle power cable for the psu
Put together the normal way though I really don't care for the psu covering the cpu cooler on the outer
First case I've ever had with a glass side but hope it holds up better then my old bob slay acrylic case
and it in the light on my desk its facing the way it is due to a mainecoon that likes to lay next to the case
Case: Enermax Steelwing in black/red
Motherboard: Asus B350M-A
Cpu: AMD Ryzen 1700 oc 3.3ghz
Cpu Cooler: Wraith Spire (fan rotated 90 degrees so amd logo is pointing up)
Gpu: Asus AMD R9 Fury Nano 4gb White
Ram: x2 G. Skill 8GB NT Series 2400mhz (running at 2133mhz won't post at 2400mhz)
HDD: WD black 750gb
SSD: Toshiba-TR150 120gb
PSU: Silverstone SFX 600watt
Some additional things
Added a evercool slim 80mm fan into the top fan grill to act as active exhaust
Had to use a old 3.5" to 2.5" adapter to fit my hard drives into the case due to the HDD actually resting against the usb2.0 header on the board which I"m pretty sure would cause a short! o.o
Using sliverstone slim sata cables to the hard drives right now to though I should look into re working the cable management on that at a later time
Anywho without further ado some pictures of the build being put together and some pictures showing some random ideas on psu relocation.
Mobo installed
random moc up on front mounted PSU with a 120 below and a slim 120 over the top exhaust (know the 120 is wasted on the top just for heck of it)
Seeing how much close the psu would fit with the stock fan bracket in the case... would need to be notched 5-7mms for clearance then it would drop in and rest next to the motherboard also room above for a right angle power cable for the psu
Put together the normal way though I really don't care for the psu covering the cpu cooler on the outer
First case I've ever had with a glass side but hope it holds up better then my old bob slay acrylic case
and it in the light on my desk its facing the way it is due to a mainecoon that likes to lay next to the case