Deskmini 310 8700k build

Discussion in 'Build Logs' started by changguangyu, Jul 1, 2018.

  1. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    Package Contents:
    [​IMG]

    Chassis and Rear I/O are same as Deskmini110
    [​IMG]
    [​IMG]
     
  2. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    wifi support CNVi now
    [​IMG]
    [​IMG]
     
  3. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    ID-Cooling VC45 with ty100 fan
    [​IMG]
     
  4. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    Chassis compared to Hibertek M5 L5
    [​IMG]
    [​IMG]
    [​IMG]
     
    comagoosie and confusis like this.
  5. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    Power adapter is AcBel ADC027, 120w, same as Deskmini 110.
    Dimension is 150*65*36mm, 600g weight, Efficiency 89% @ 115/220Vac max. load


    [​IMG]
     
  6. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    SD Card slot:
    [​IMG]
     
  7. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    Audio slot will interfere with some wide m.2 heatsink.
    [​IMG]
    [​IMG]
    [​IMG]
     
    br3nd0, Biowarejak and confusis like this.
  8. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    Run 4 days now, very stable.
    [​IMG]
     
  9. confusis

    confusis John Morrison. Writer, Editor, Awesome Person.
    Site Staff SFF Workshop

    Awesome build. Glad to see another DeskMini fan! The Thermalright cooler shows exactly the amazing scale these systems have.
     
    Mtthwmths and Biowarejak like this.
  10. HereToHelp

    HereToHelp Minimal Tinkerer

    This looks great!
    What model/brand heatsink are you using on your nvme SSD?
     
  11. changguangyu

    changguangyu Average Stuffer
    Thread Starter

  12. Valantar

    Valantar Cable-Tie Ninja

    Have to ask: do you actually need a heatsink on the drive? What kind of loads are you subjecting it to? What temperatures are you seeing?Especially with it positioned right in the airflow path from the CPU cooler, one would think that thermal throttling would be a non-issue.
     
  13. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    It's very useful. SSD will overheat frequently, and thin heatsink also not help much when copying large files.
     
  14. Valantar

    Valantar Cable-Tie Ninja

    Hm, interesting. What brand/model is the SSD? I do have a (much!) larger case, but my 960 Evo lives behind the motherboard with very little access to air, no heatsink, and the only air intake in my case is through a radiator, but I've still never seen ti exceed 75C even when stress testing.
     
  15. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    I'm using Samsung 970 Evo. I tried copy over 100G large files, there is throttling due to overheat.
     
  16. Valantar

    Valantar Cable-Tie Ninja

    Well, if that's something you do often, I suppose you're one of those edge cases that actually might have need for an SSD heatsink then :)
     
  17. HereToHelp

    HereToHelp Minimal Tinkerer

    Where can I get the ty100 fan?
     
  18. changguangyu

    changguangyu Average Stuffer
    Thread Starter

    I buy the AXP100RH
     
  19. fadsarmy

    fadsarmy Efficiency Noob

    The I/O shield is not on properly where the power connector is. The clip should be inside the case.
     
  20. HereToHelp

    HereToHelp Minimal Tinkerer

    1. So the i7-8700k is recognized by the BIOS. What about the i7-8086k, do you know if it will be recognized by the BIOS?
    2. What is the CPU fan speed set for in the BIOS?