cpu cooler

  1. XCreator

    Concept Sun Cool 150W TDP slim heatsink

    Update 8-May-2018 Design change Estimate performance will be same water cooler if equip with 92mm x 25mm fan or bigger. Hi guy, I'm assistant from XCreator, established by Mr Rolexus, he now focus in design and other jobs, I'm in charge in media. This Sun Cool is a full copper heat sink TPD...
  2. K

    Absolute best possible thermals for the cpu

    Hello everyone. With so many expert builders here I was hoping for some suggestions with how to move forward. I currently have this configuration: I7 7700k Asus Z270i 32 GB Corsair LPX Silverstone 700 watt SFX-L psu GTX 1080 ti founders edition. Current cpu cooler is NH-L12. There are three...
  3. BernardoZ

    Cooling Fanless low-profile cpu cooler?

    Hello guys. As some of you might know, I'm recently working on a sff pc case, that will support up to 50mm cpu cooler height (check thread). My main concern about it is cpu cooling, as the tempered-glass panel has no vent holes, and this may cause some turbulance and noise. So I was thinking...
  4. OptimusWC

    Cooling Introducing Optimus Water Cooling

    Hi everybody! We're a very new water cooling company located near Chicago, IL. We make all of our blocks in the USA and we have some of the smallest micro fins and channels in the world. We have a fin density that is higher than other blocks currently on the market and according to our...
  5. R

    Is there anything useful I can do with a spare wraith spire cooler?

    For my MC600 Build I got a Ryzen 1600 that also happened to come with a Wraith Spire cooler. I bought a noctua l9a instead because the wraith cooler won't fit, so I'm wondering if there's anything useful I can do with the old cooler. I was thinking that maybe I could replace the fan on my GPU...
  6. D

    CPU Mfg process for CPU, (clivening?)

    Earlier today, when I was younger and had more RAM avail., I read about a cpu manufacturing process called perhaps(clivening?). I'd never heard the word before, so I read onward. A single block of aluminum is used for both the base and fins of the cooler. I dunno how they do it, but they...
  7. X

    .SKP AMD Wraith Spire 2017-04-25

    70mm tall. Done from random pictures on the internet, height guessed from people on forums. Fan size assumed 92mm.
  8. Parge

    Cooling Parge's Scythe Kodati Review (vs Noctua NH-L9i)

    As my quest to go ever smaller collides with the fact that I've done slightly less gaming in the last 6 months or so, I've recently sold off my badass 5820k/980ti NCase setup and downgraded to less powerful (and less expensive!) components.......that just happen to fit in a NFC S4 Mini While I...
  9. Blorgon

    Fan overlapping bare CPU heatsink?

    Been a while since I stopped in. Glad the forum has picked up! I've been sitting on a design for a while now that I really want to have manufactured (far from that point; all I have is a mock-up at the moment). The whole design depends on how well a section of a large fan placed over a CPU...
  10. iFreilicht

    NH-L9 Thumbscrew Diameter?

    Does anyone happen to know the outer diameter of the Noctua NH-L9s thumbscrews?
  11. QinX

    .SKP & .STEP Intel LGA2011 Heatsink Keep-Out Zone 1.0

    A 3D CAD and Sketchup model according to Intel Specification of the LGA2011 Wide ILM Heatsink Keep-Out zone. What would you use this for? This is mostly interesting if you are designing you own heatsink or waterblock/Monoblock and want to adhere to the Intel specification to warrant motherboard...
  12. QinX

    .SKP & .STEP ID Cooling IS-25i 1.1

    3D CAD model of the IS-25i from ID Cooling. Measured using digital calipers and external dimensions are accurate to within 0.5mm. Heatpipes are slightly off compared to the actual cooler.
  13. QinX

    .SKP & .STEP ID Cooling IS-26i CPU Cooler 1.1

    3D CAD model of the IS-26i from ID Cooling. Measured using digital calipers and external dimensions are accurate to within 0.5mm.
  14. QinX

    .SKP & .STEP Intel LGA1150 Heatsink Keep-Out Zone 1.0

    I took the time to 3D model the Intel LGA115x Heatsink Keep-Out zone according to the dimensions provide by Intel. What would you use this for? This is mostly interesting if you are designing you own heatsink or waterblock/Monoblock and want to adhere to the Intel specification to warrant...
  15. X

    .SKP Gelid SlimHero 2016-02-04

    Heatsink only. Done from diagrams. Not 100% accurate but the clearances (19mm under heatpipe, 30.5mm under side wings) should be fine.