cooler

Hi all, for sale I have two (2) unused horizontal flow Intel CPU coolers designed to fit in a 2U server chassis. Advertised to fit 2011/2066/115X sockets so should also work on socket 1200 and any other socket with the same mounting holes. Cooler height from cold plate is exactly 65mm. Selling...

while searching for some suitable sub 65mm tower cooler for one of my next (wind-tunnel style) case designs I found this little gem... it is selling under different brands around the globe but I managed to find the OEM and could probably get a good deal for the community if there should be...

Hello guys. I always dreamed of a compact, but over-performance computer. I have never tried to build SFF PC before, so I can not answer unequivocally some of the questions that arise. And the most important question is how to cool my CPU? I studied many reviews of coolers and identified the...

From www.modders-inc.com review I decided to share this pic here because the official page provides much fewer details.

Hello, seeing as orders have opened for the new Ryzen chips, I'm curious about the fact that the 3600 and the 3700x both have the same power draw of 65W. Despite the 3700x being more powerful, I know this doesn't necessarily mean it is going to run hotter. I know it's very early days, but I was...

If I went with a NH-L12S/Big Shuriken 3/etc. sized cooler for my portable SFF setup would I need to remove them before transporting the system? Are the coolers too heavy to remain secure on the motherboard and not cause damage? Does anyone have any experience with this? I'm asking because I...

***** Before I start, it's worth mentioning that this isn't an ongoing build per se. It's the steps taken to modify a component, for my build. It's probably been done before, but, I figured it might be cool to some people, and this seemed like the most appropriate space :) ***** For my current...

Hello, I'd like to tag @AseDen for this thread. So when designing chassis, some of it is a bit of a chicken and egg problem. We had a few chassis built around specific coolers in mind: namely the Big Shuriken 2 and the NH-L12. The Dancase A4 had also been modified to fit the Asetek 92mm in its...

Good morning, I have been lurking these forums for a while now and finally decided to make an account to get some advise on a build I have been wanting to do for quite some time. I'm looking to build a portable (as in easily transportable by bike) powerhouse that supports an overclocked i7...

Hey all, I want to try my luck at snagging a deal on a premium sff case! Something along the lines of the Dan Case/Ncase, but even the ranks of Case Mod will do. Pretty much a beginner at this stuff, but let me know what deals can be had! For coolers, I am looking for something that is decent...

Just found out about this on Noctua's official Tmall page: L9a Link L9i Link The graphene version is new and there is no information about it on the page. I understand that graphene has much higher thermal conductivity, but does it work well in real life?

Hello Everyone! I'm planning a build on the Geeek A40 and most of the options for CPU cooler are pretty ugly or expensive. My CPU will likely be the Ryzen 7 1700, which comes with the Wraith Spire LED cooler. Clearly the spire does not fit the case, but it is easy for me to purchase a cheap...

So I wanna make a small form factor build but I'm on a strict budget, around £600. I already Have a 980 ti to shove in there so I wanna use the £600 on EVERYTHING ELSE. The 980ti is by zotac and is a blower style cooler so there is some info if it is needed. Anyway I wanna build in the node...

Hello there, I just joined the community today after spectating for quite a while. I have a general fit question for AIO CPU coolers in the Silverstone Sugo SG13 WB-Q. Has anyone attempted putting the NZXT Kraken X42 or the Deepcool CAPTAIN 120EX in this case? My concerns are- - NZXT 140mm...

I'm currently thinking about doing a build in the beautiful Dan Case A4, but non of the blower style gpus i'm looking at really match the aesthetic of the build. I was curious, would I be okay using the EVGA SC2, with an open air cooler, for should I be looking at exclusively blower style?

I got my hands on two Cryorig C7 Cu coolers from China. They are in the possession of my TaoBao agent (very reputable company called SuperBuy - confirmed via pics). There is a bit of an "early adopter fee" because of shipping from China, but I figured for a chance to get one of these after...

I'm not very satisfied by the looks of Scythe Kodati that I have so I was looking for a cooler and came across the one in title. I'm wondering if the fan is detachable and I could replace it with a regular 80mm case fan of my liking.

I currently use my noctua nh-l9i as cpu fan. And no surprise, it's very silent. I saw that I can get 25mm fans that fits the cooler both in the beige color and in the grey redux one. can actually fit it in my case and still have 10mm before I hit the plate. Will they perform better than the...

Hello guys. I'm currently working on a SFF case, that will be revealed here in January. Right now, me and my team are heaving some trouble on choosing the supported cpu cooler height My doubt is: what is the lower CPU cooler you guys consider acceptable to handle 95w cpu? Like an i7 or Ryzen7...

I'm selling out parts of my main build to downsize and transition to another build. All prices include shipping in the continental US. For shipping to other regions, shipping cost is extra. GT 1030 and motherboard are already sold First, a Gigabyte GT 1030, brand new in box. It is the...