Recent content by threestripevida

  1. threestripevida

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    I have no problem doing that to test it out. Best case scenario I can do that Wednesday, but otherwise it might be a week or two before I can test that setup.
  2. threestripevida

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    If I was playing RDR2 it would easily go to 70-75c and memory temps would hit 100c as well. There is definitely plenty of ventilation on this case to get that hot air out. I do have the 3090 undervolted as well, but I can do some more testing if people are interested and get some better temps.
  3. threestripevida

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    Moved my build from the Sliger S620 over into the Big-560. Putting the case together wasn't too bad and I already shared some feedback with @REVOCCASES about sending the manual as a PDF to make the pictures easier to see when trying to figure out which screws to use. Tolerances were pretty...
  4. threestripevida

    Log MODZERO SHOCK* - SLIGER S610/S620

    Build looks great so far! I have the Octo controller as well, but do you not need to connect the molex connector to power it? I’ve got 4 fans plugged into mine with a temp sensor as well.
  5. threestripevida

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    Damn I wish I knew about this case when I got my 3090Fe. The bottom to top airflow seems perfect and it seems like it would be easier to build a custom loop in this case than my Sliger S620.
  6. threestripevida

    Log Sliger S620 - ITX Master Piece!

    Nice build log. I’m in the S620 as well and I’m using the same cpu and gpu as you. I have rear intake with the slim fan on the D15S since having it directly on the case cause some turbulence. Not sure how much it helped, but having a 140mm fan as exhaust on the side might help as well.
  7. threestripevida

    DAN C4-SFX

    I’ll admit that I didn’t bother watching that video. Partly caused I knew I’d get annoyed if they did something stupid and also because I don’t care about the Raw S1. I’ll check it out though and see if my criticism still stands.
  8. threestripevida

    DAN C4-SFX

    I agree he did a good job on the A4 review. Hopefully he continues that with the C4-SFX.
  9. threestripevida

    DAN C4-SFX

    Can you make sure Linus actually spreads good information about the case and the compatibility? I get that they are an entertainment channel more so these days, and that having your case featured on there is great for exposure. They just gloss over a lot of things and don’t properly plan out...
  10. threestripevida

    Stalled DICE CASES - FLOW : expandable SFF case for watercooling enthusiast (built in distroplate)

    So, what happened to the case and Dice Boi? Did he ghost everyone?
  11. threestripevida

    Stalled [Update: 22-02-2021 - V1.1 Revised internals] LytCase Rogue: 8.9L Sandwich style case with 240mm AIO support.

    in my opinion it’s nice to have a place to mount a 2.5 inch drive. If there’s one thing I’ve learned from being on this forum for a few years and seeing peoples build tho, is that people will find a place to put the drive on their own if they really need it.
  12. threestripevida

    Production FormD T1 Classic (READ FIRST POST)

    this case was made for 120mm AIOs originally. The fact that 240mm rads fit was a coincidence and support for it was added after. A 120 rad is still plenty for most people too.
  13. threestripevida

    Production Meshlicious - 14.5L Vertical, 280AIO mainstream case

    @Wahaha360 with the size of the this case and mesh panels all over is there a big enough temp difference between a 240mm and 280 mm aio?
  14. threestripevida

    Production FormD T1 Classic (READ FIRST POST)

    Im swapping the Corsair aio I got to the 120mm EK one on Wednesday or Thursday hopefully. I plan on mounting the radiator to the top panel directly. I’ll take some pics and post them here
  15. threestripevida

    Production FormD T1 Classic (READ FIRST POST)

    I mentioned the other day that my pump had died and I would need to swap parts out in my build. I was going to use the LT Solo pump/block to watercool only my CPU and go back to aircooling my gpu. Unfortunately, the LT Solo was not going to be able to fit on my board with the fittings I was...