Press Release: When a new post is marked a such, the content is copied verbatim from the company’s release, and does not necessarily reflect the views of Small Form Factor Network or Minutiae LLC.
CRYORIG Announces Frostbit M.2 Cooler and C7 RGB for Computex 2018
22.05.2018 Taipei, Taiwan – Ahead of Computex 2018 CRYORIG announces new M.2 cooler Frostbit and RGB enhanced C7 RGB CPU Cooler. CRYORIG’s Frostbit is not only the industry first aftermarket M.2 NVMe SSD cooler with dual heatpipes, it allows full adjustment of the Secondary Heatpipe and large volume Heatsink. The C7 RGB is based on CRYORIG’s award winning ITX cooler C7, with a 12v RGB lighting enhanced 92 mm fan. Both products will be shown at CRYORIG’s Computex booth at Nangang Exhibition Hall I0527.
The Frostbit is the first aftermarket M.2 cooler using the heatpipe technology. It’s Dual Stacked Heatpipes work cooperatively to form a massive heat dissipation surface. The First 1 mm Ultra-Thin Heatpipespreads heat from components into the Primary Heat Spreader. The Secondary Heatpipe is then attached to draw heat further into a large volume Heatsink. The Frostbit’s Heatsink can also be adjusted to fit different PC setups. The Secondary Heatpipe’s angle can be manually tilted to either side to avoid interference with the GPU or a large CPU coolers.
Based on one of the best ITX coolers on the market, the C7 RGB adds 12v RGB lighting to an already stellar performer. With the C7 RGB being a top-flow cooler, once lit up the C7 RGB becomes the lighting center piece of any ITX build. The C7 RGB lighting system is built on standard 12v RGB LEDs integrated in its 92 mm PWM fan. Simply plug in the Fan RGB header into either a 12v RGB port on the mainboard or any 12v RGB lighting controller. It is compatible with all major 12v RGB controllers and boards.
Both the Frostbit and C7 RGB as well as further upcoming products from CRYORIG will be shown at Computex 2018 in Nangang Exhibition Hall I0527 beginning on June 5th to 9th.
| Frostbit Specification | |
|---|---|
| Dimensions | L72 x W26,3 x H57 mm |
| Weight | 56 g |
| Heatpipes | 1 x 6 mm Heatpipes, 1 x 1 mm Ultra-Thin Heatpipe |
| Fin | T = 0,4 mm; Gap = 2,4 mm |
| Fin Pcs | 19 x 2 = 38 pcs |
| TDP: | 12 W |
| C7 RGB Specification | |
|---|---|
| Dimensions with Fan | L97 x W97 x H47 mm |
| Weight (with Fan) | 357 g |
| Heatpipes | 4 units 6 mm Copper Heatpipes |
| Fin | T = 0,4 mm; Gap = 1,2 mm |
| Fin Pcs | 57 pcs |
| TDP: | 100 W |
| Fan Specification | |
|---|---|
| Dimensions | L92 x W92 x H15 mm |
| Weight | 62 g |
| Rated Speed | 600 ~ 2500 RPM ±10 % |
| Noise Level | 30 dBA |
| Air Flow | 40,5 CFM |
| Air Pressure | 2,8 mmH2O |
| Ampere | 0,2 A |
| RGB Lighting | 12 V |
CRYORIG’s Computex 2018 Info Page
CRYORIG Frostbit Product Page
CRYORIG C7 RGB Product Page
Officially founded in 2013, CRYORIG is a fresh new comer to the PC peripherals and Cooling market with a core team of seasoned veterans. The team’s resumes include experiences with renowned brands such as Thermalright, Prolimatech and Phanteks. The members are overclockers and PC modding enthusiasts, with a passion to strive for nothing but the best. With the long experience and drive for innovation and improvement, CRYORIG is about applying RESEARCH and innovative IDEAS making the coolest GEAR possible.
