what itx case will fit my setup

[sinusone]

the issue is the GPU i got was too large for most ITX cases.
I had the thermaltake core v1 but it didn't fit, it was just a tad too thick its like 2.25 slots wide because of the fan shroud. and minorly the CPU cooler is somewhat tall.


https://pcpartpicker.com/list/VnmB8d

CPU: Intel Core i5-4690K 3.5GHz Quad-Core Processor (Purchased For $199.00)
CPU Cooler: Noctua NH-C14 CPU Cooler
Motherboard: Gigabyte GA-Z97N-WIFI Mini ITX LGA1150 Motherboard (Purchased For $80.00)
Memory: G.Skill Ares Series 16GB (2 x 8GB) DDR3-2133 Memory (Purchased For $99.99)
Storage: Samsung 850 EVO-Series 500GB 2.5" Solid State Drive ($164.99 @ Jet)
Video Card: MSI Radeon R9 390 8GB Video Card (Purchased For $266.00)
Power Supply: XFX TS 550W 80+ Bronze Certified ATX Power Supply (Purchased For $24.99)
Total: $874.01
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2017-01-13 17:45 EST-0500

 

[Thehack]

Define Nano S with an SFX PSU.

 

[Josh | NFC]

If you considered the Core V1 then please check out the Caselabs BH2. Top shelf quality, made in America, and plenty of room. Yes, it is 4x the price, but it is also something worth paying for.

Peace!

 

[TheHig]

That card is just under 11 inches so it would fit in the case I use which is the Riotoro CR280 the one seen in my avatar. I have a GTX 1070 in there and it is 10.5 in long. You would have to remove the front lower 120mm fan to fit. I used a SFF psu for airflow purposes but the case will take standard ATX PSUs. The case is nice and compact and has room for a 140mm tall cpu cooler.I got it cheap and have had a good experience with it.

The Define Nano S will definitely work as mentioned by Thehack but is a bit larger front to back.

Good Hunting!