I have a CustomMOD Slim Batch #2 case with vertical stand for sale.
There is a cut out for USB 3.0. (with screws to swap out for another I/O). Comes with a PCIe LiHeat 300mm D.type and a modDIY USB 3.0 front I/O panel cable. Has a black machined power button.
I expected to have the case for a build in by mid June, however now I will have to scrap the build.
I currently have the G Unique Arch Deamon DC PSU (2 SATA power, 24pin Mobo connector, 8 pin CPU, 8 pin GPU) and 400W tested Dell power brick. It is designed for the CustomMOD Slim ITX.
Ideally a 7700 or Ryzen (with noctua L9i cooler) with a 1070GTX mini Itx. Memory Clearance is 42/40 mm.
Asking for $400 + shipping for both the PSU and the case. I prefer to ship within US.
I live in Hudson Valley region of New York, if you want to pick up locally.
Edit:
This is Batch #2, which is now Rev 4.
Cpu cooler height + fan is 38mm (can only fit the Noctua L9i/a)
Venting holes= largest for max airflow (most common design).
RAM Clearance = 43mm max.
Can support 2 2.5'' HD/SSD
GPUs supported: Height <132mm, Length <185mm
See below
- Gigabyte GTX 1070 Mini ITX
- MSI GTX 1070 Aero ITX
- Evga GTX 1060 Mini SC
- Zotac GTX 1060 Mini
- PNY GTX 1060
- Gigabyte GTX 1060 Mini ITX
- MSI GTX 1060 Aero ITX
- Evga GTX 1050 Ti Mini SC
- Zotac 1050 Ti Mini
- Zotac 1050 Ti OC Edition
- Gigabyte GTX 1050 Ti D5
- MSI GTX 1050 Ti Aero ITX
- XFX RX 460 Slim
For more details on the case please see here
There is a cut out for USB 3.0. (with screws to swap out for another I/O). Comes with a PCIe LiHeat 300mm D.type and a modDIY USB 3.0 front I/O panel cable. Has a black machined power button.
I expected to have the case for a build in by mid June, however now I will have to scrap the build.
I currently have the G Unique Arch Deamon DC PSU (2 SATA power, 24pin Mobo connector, 8 pin CPU, 8 pin GPU) and 400W tested Dell power brick. It is designed for the CustomMOD Slim ITX.
Ideally a 7700 or Ryzen (with noctua L9i cooler) with a 1070GTX mini Itx. Memory Clearance is 42/40 mm.
Asking for $400 + shipping for both the PSU and the case. I prefer to ship within US.
I live in Hudson Valley region of New York, if you want to pick up locally.
Edit:
This is Batch #2, which is now Rev 4.
Cpu cooler height + fan is 38mm (can only fit the Noctua L9i/a)
Venting holes= largest for max airflow (most common design).
RAM Clearance = 43mm max.
Can support 2 2.5'' HD/SSD
GPUs supported: Height <132mm, Length <185mm
See below
- Gigabyte GTX 1070 Mini ITX
- MSI GTX 1070 Aero ITX
- Evga GTX 1060 Mini SC
- Zotac GTX 1060 Mini
- PNY GTX 1060
- Gigabyte GTX 1060 Mini ITX
- MSI GTX 1060 Aero ITX
- Evga GTX 1050 Ti Mini SC
- Zotac 1050 Ti Mini
- Zotac 1050 Ti OC Edition
- Gigabyte GTX 1050 Ti D5
- MSI GTX 1050 Ti Aero ITX
- XFX RX 460 Slim
For more details on the case please see here
Last edited: