Prebuilt Shuttle Debutes 3-Liter XH110G SFF PC Barebones: Supports Full Size 1 Slot PCIe and LGA 1151 V1

[Hifihedgehog]

Source:
http://global.shuttle.com/products/productsDetailUS?productId=2189
via
http://www.anandtech.com/show/11735...cs-card-into-a-3liter-xh110g-sff-pc-barebones

FORM FACTOR 3L chassis
PROCESSOR Support Intel Skylake/Kabylake Core i3/i5/i7, Pentium, Celeron CPU max. TDP 65W
CHIPSET Intel H110 Express chipset
MEMORY 2 x DDR4 SO-DIMM slots,16GB per DIMM (Max 32GB)
Dual Channel DDR4 2133/2400 Mhz
VIDEO OUTPUT HDMI + VGA port dual display
AUDIO Realtek ALC662 High Definition Audio
ETHERNET Intel i211
10Mb/s,100Mb/s,1Gb/s operation
Support Wake-On-LAN function
STORAGE INTERFACE SATA 6.0Gb/s interface
ONBOARD CONNECTORS (1) SATA connector w/power
(1) 4 Pin fan connectors
BACK PANEL (1) RJ45 Gigabit LAN port
(1) HDMI
(4) USB 2.0 ports
(1) VGA
(2) Antenna Hole
(1) DC in
DRIVE BAYS (1) 2.5" HDD / SSD bay
DIMENSIONS 250(L) x 200(W) x 78.5(H) mm
POWER Input:100- 240V AC
Output: 19.5V/9.23A
180W Adapter
ACCESSORIES XPC Multilanguage Quick User Guide
XPC DVD Driver
1* Power cord
1*180W adapter
1*Screw pack
1*VESA bracket
1*VESA screw pack
" Optional " WLN-M , PS01
EXPANSION SLOT (1) M.2 2280 Type M key socket
(1) M.2 2230 Type A,E Key socket
(1) PCI-E X16
OS SUPPORT Windows 7 (Skylake only)
Windows 10
Linux

 

[cleveland]

I. NEED. THAT.

that's EXACTLY what i always wanted!!! It's even better than the ISK110! <3

 

[Jonny727272]

The front panel is kind of gross, but the case as a whole is amazing looking.

 

[Hifihedgehog]

Question: Has anyone successfully modded the single slot GALAX GTX 1070 to shorter lengths? If it fit, that would make this the ultimate portable gaming rig.

 

[VegetableStu]

I dunno, the card's 267mm long (with the PCI IO shield) and the shuttle caps out at 208.5mm (just card length). 60mm doesn't sound like a trivial amount

 

[aquelito]

This is the mobo I've been dreaming of !

I love the concept : I'm running the exact same configuration but with a Gigabyte H110 thin mini-itx board, which has a PCIe X4 slot only.
I power both the system and a 1050 Ti with a single 12V brick.

@Hifihedgehog Thanks for sharing.
The only way to mod the Katana would be to water-cool it, since it has a short PCB.
You would end up with an external rad on top of the case.

EDIT : only USB2 connectors on the IO...

 

[ondert]

fcuk yeah! this thing is dope!