Memory ram for ryzen 3000?

[Rmorrison]

I looked up the corsair dominator platinum and there is a kit specifically for AMD. Im not really into the whole rgb scene and was wondering if the non amd kit would work.

heres the amazon link

 

[W4RR10R]

Yes the non AMD kit will work, and according to AMD the sweet spot for ram speed is 3600mhz, but no higher than 3733mhz, anything higher amd the interconnect between the memory controller and the infinity fabric goes from 1:1 to 2:1 which increase latency.

 

[Rmorrison]

awesome thanks for the insight. 3600 it is.

 

[Rmorrison]

would this be a better buy?

G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel Z170 / Z270 / Z370 / X299 Desktop Memory Model F4-3600C16D-16GTZKW - Newegg.com

Buy G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel Z170 / Z270 / Z370 / X299 Desktop Memory Model F4-3600C16D-16GTZKW with fast shipping and top-rated customer service. Newegg shopping upgraded ™

www.newegg.com

Edit - wong link

 

[W4RR10R]

d this be a better buy?

G.SKILL TridentZ Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3333 (PC4 26600) Intel Z370 Platform Desktop Memory Model F4-3333C16D-32GTZSK - Newegg.com

Buy G.SKILL TridentZ Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3333 (PC4 26600) Intel Z370 Platform Desktop Memory Model F4-3333C16D-32GTZSK with fast shipping and top-rated customer service. Newegg shopping upgraded ™

www.newegg.com

These would be better and are cheaper
https://pcpartpicker.com/product/d3...-2-x-8gb-ddr4-3600-memory-f4-3600c17d-16gtzkw

 

[Rmorrison]

i dont have to go 32 gb. 16 gb should be enough really for 3d modeling, right?

 

[W4RR10R]

i dont have to go 32 gb. 16 gb should be enough really for 3d modeling, right?

Really depends on what your modeling, I use solidworks on my Lenovo y510p and its only got 16 GB of LPDDR3 and it does just fine until my part counts get into the hundreds, and thats not necessarily just the rams fault, its a pretty old laptop. Its still useable too it just doesn't like when I try to move alot of parts at once.

 

[Rmorrison]

I appreciate you homie! My wallet thanks you. Now to search for a graphics card.

 

[W4RR10R]

Are you going to game on your pc or are you just going to do 3d modeling