Concept R-Cube 12L

sergiiua

The builder of unique cases ...
Original poster
CustomMOD
Jan 11, 2017
1,027
1,842
www.facebook.com


The R-Cube 12L is a small enclosure for a productive gaming PC. Despite the small volume in it, you can assemble a fairly powerful PC with a powerful cooling system. Easy assembly due to simple construction. The housing has several Display Port connectors with an internal cable for connecting a video card.

Specification
  • Volume: 11.9L (290mm x 223mm x 184mm)
  • Material: steel (1mm); aluminum (1,5mm); plexi
  • MB: mini ITX (170 x 170mm)
  • Cooler: up to 165mm
  • AIO: Radiator max 125x125mm + 2fan
  • PCIe riser: LiHeat 300mm
  • PSU: SFX / SFX-L
  • GPU: длинной до <285mm, <dual
  • Storage: SSD/HDD: 2 x 2.5" / HDD 3.5"
  • Fan: 1 x 120x120x25mm


 
Last edited:

jkiejr

Average Stuffer
Jan 26, 2018
81
31
That is incredible, its perfect. It is everything i am looking for in a case. Are you using acrylic on the front and top.
 

sergiiua

The builder of unique cases ...
Original poster
CustomMOD
Jan 11, 2017
1,027
1,842
www.facebook.com
That is incredible, its perfect. It is everything i am looking for in a case. Are you using acrylic on the front and top.
yes it will be a one-piece acrylic lid on magnets. will close before and top.

an aluminum cover will also be available.
 
  • Like
Reactions: Bjornyyy

penghutw

Trash Compacter
Nov 23, 2018
41
22
I'm confused. How are you going to jank connect the GPU to the PCIe slot on the motherboard?

Bendy risers don't seem like a good idea.
 

jkiejr

Average Stuffer
Jan 26, 2018
81
31
bendy risers are used in just above every sandwich case out there, the dan, the sm5x series, etc.
 

penghutw

Trash Compacter
Nov 23, 2018
41
22
bendy risers are used in just above every sandwich case out there, the dan, the sm5x series, etc.
No those are normal risers. What I meant was the riser will clearly have to be folded at a 90 degree angle.

I've since then found that it is possible to do riser origami, but I'm not sure how I feel about that.
 

loader963

Master of Cramming
Bronze Supporter
Jan 21, 2017
609
528
Like everything except where the hdmi/displayport cables are gonna come out of the front of the top of the case.
 

CC Ricers

Shrink Way Wielder
Nov 1, 2015
1,832
1,962
Like everything except where the hdmi/displayport cables are gonna come out of the front of the top of the case.
I actually see no way on the top for the cables to come out. They probably will pass through with an extension using three holes on the back, right above the motherboard I/O.
 
  • Like
Reactions: loader963

loader963

Master of Cramming
Bronze Supporter
Jan 21, 2017
609
528
I actually see no way on the top for the cables to come out. They probably will pass through with an extension using three holes on the back, right above the motherboard I/O.
Was assuming the lack of holes on top was due to it being a render. But this could be it too.