Power Supply Power brick for X310 (X3-ATX)

[dymsza]

My first post on this forum Let me start by saying: HI, All!

To the point:

I'm planing to put

Gigabite z390
i5 8500t (35w)
RX570 (150w)

Inside the MC600 (It will be mod to provide some decent cooling).
As a power supply I'm planing to use X310 (X3-ATX) and I'm looking for recommendation on power break.

The only thing I have found is Dell 330W brick. Would that be reasonable setup ? Any other recommendation ?

 

[Thehack]

Dell brick will work. Meanwell GST280A24 will also work. You will need to make sure the pinout is correctly wired.

 

[dymsza]

On X310?

What sort of pinout issue I can expect ?

 

[Thehack]

On X310?

What sort of pinout issue I can expect ?

You just have to make sure the brick's +V and -V matches up with the board's +V and -V. For example, the meanwell unit I suggested, the negative pins and positive pins and reversed compared to most pinouts.