Production n3rdware Launches the Yocto SFF Chassis
- Thread starter robbee
- Start date
Thanks!!
By the way, if the MOQ of 10 is holding someone back to order, this number is not set in stone. I got my first order in today and a couple more should already be enough to confirm a first batch.
Meanwhile, I'm trying to spotlight the case on more channels to get more traffic to the website, and hopefully, more orders.
It's the ADT-link R33C: http://www.adt.link/product/R33C.html
The one in the pictures is actually an older 3.0 version that I used before the ADT-link one was released. The current one is all black and supports PCIe 4.0
The one in the pictures is actually an older 3.0 version that I used before the ADT-link one was released. The current one is all black and supports PCIe 4.0
So I got some questions about customising both the dimensions and colours of this case. Within the current batch, I'm able to customise 2 things: the height of the case and the colour of the printed parts. Let me explain both in some more detail:
Height of the case
I can make the case 10mm taller to allow for coolers up to 50mm and the possibility to mount a 2.5 inch drive on top of the GPU. Making it taller wou defeat the purpose of the form factor as you'd get close to the point where you can use a low profile GPU without riser.
Custom colours
Using metal other than brass is hard as it would drive up prices too much, but I can use any colour you'd like for the printed parts. I can't show any pictures of this, but here's some fun I had in photoshop with my existing pictures (don't mind the low quality):
Feel free to pm me here or on the sff.network discord if you'd like to discuss any of the above!
Height of the case
I can make the case 10mm taller to allow for coolers up to 50mm and the possibility to mount a 2.5 inch drive on top of the GPU. Making it taller wou defeat the purpose of the form factor as you'd get close to the point where you can use a low profile GPU without riser.
Custom colours
Using metal other than brass is hard as it would drive up prices too much, but I can use any colour you'd like for the printed parts. I can't show any pictures of this, but here's some fun I had in photoshop with my existing pictures (don't mind the low quality):
Feel free to pm me here or on the sff.network discord if you'd like to discuss any of the above!
For people who want to get a better look at how exactly every aspect of the case looks, I have added a 3d model viewer to the product page: https://n3rdware.com/cases/yocto
There are some minor details that are different from the pictures as I tweaked a couple of things after making my own case.
There are some minor details that are different from the pictures as I tweaked a couple of things after making my own case.
how nice! I've been eyeing on new cases around this size. First I was tempted by Densium APU but it was only for RX6400 and then saw J-Hack stratos but that one is still in development and now this, boom!
This was the case I was thinking actually. HDPlex 250w GaN + Dual slot LP GPU + as crammed as possible :d
Besides being in europe is a plus for me too since it's closer.
One thing that though, could you update the price as 149 euro? I'm asking because right now I'm living in Turkey and they have tightened the rules quite a lot recently. For anything with a value of 150 euro or more, I have to hire a financial advisor which makes things quite messy and increases the custom fees dramatically. For under 150 euro, I'll pay just regular VAT and take the package out of customs.
This was the case I was thinking actually. HDPlex 250w GaN + Dual slot LP GPU + as crammed as possible :d
Besides being in europe is a plus for me too since it's closer.
One thing that though, could you update the price as 149 euro? I'm asking because right now I'm living in Turkey and they have tightened the rules quite a lot recently. For anything with a value of 150 euro or more, I have to hire a financial advisor which makes things quite messy and increases the custom fees dramatically. For under 150 euro, I'll pay just regular VAT and take the package out of customs.
That's a good point. Import tax for the EU also starts at 150 euros so it makes sense. I've updated the price to 149.99 so the ones who already ordered don't feel scammed for their 1 euro
Hope that works for you!
With already 5 orders for the Yocto and another 7 for the A2000 heatsink, it looks like I'll have to close pre orders sooner than expected, as I unfortunately don't have the means to produce them at high volumes. I don't want to push anyone, but if you consider this case, you may have to decide soon
Last edited:
We're two weeks after the introduction of the case now, and I'm very happy to announce that I've reached the limit of cases I can produce and pre-orders have been closed! Parts have been ordered with many on the way already, I'll keep posting regular updates in this thread. Yocto is happening, woohoo!
If all goes well with this batch, I may run another one in early summer, including the Ronto APU case. There's a newsletter signup form on the bottom of my website if you want to get updates about new batches.
Similar threads
