GPU GPU fan connector (EVGA 3090,3080,3070) (JM4, JM5)

Apotessar

Cable Smoosher
Original poster
Aug 1, 2020
12
10
Hello together
For a circuit to switch off the fan externally, I need a connector for the EVGA GPU fan header. I tried a few others I had at home, but EVGA seems to use a different connector.
(https://forums.evga.com/FindPost/3208471 as seen here, the blue one)
(or here Imgur: The magic of the Internet)



Can anyone tell me which plug and connector to use to make some sort of extension cable? I am almost certain that the plug must be a JST ZE. However, the socket seems to look different from the ZE connector data sheet.

Thx for your suggestions
 
Last edited:

Phuncz

Lord of the Boards
SFFn Staff
May 9, 2015
5,943
4,952
Most GPUs use a JST-PH connector:

1625412431665.png


Unsure if this is the correct one, difficult to see with the small image in the link you provided.
 
  • Like
Reactions: Apotessar

Apotessar

Cable Smoosher
Original poster
Aug 1, 2020
12
10
Unsure if this is the correct one, difficult to see with the small image in the link you provided.
Yes, not a good picture. I took a recent picture of my graphics card (added to the 1. post).
I still had a JST-PH connector lying around. Unfortunately, it does not fit.
 

Phuncz

Lord of the Boards
SFFn Staff
May 9, 2015
5,943
4,952
Ah yes, your picture indeed shows a different connector than the JST-PH. I'm not sure which this is though, generally GPUs use the same one, luckily.
 

BaK

King of Cable Management
Bronze Supporter
May 17, 2016
967
957
According to this thread: https://forums.evga.com/Which-fan-header-is-used-on-3080-FTW3-m3191712.aspx
This could be an
Yeonho SMH200-NN 4 pins



-> https://www.alibaba.com/product-detail/yeonho-SMH200-04-4-pin-plastic_60870310448.html
 

Apotessar

Cable Smoosher
Original poster
Aug 1, 2020
12
10
That is certainly the right direction. I found some others on Aliexpress that should also fit. A few of them were available in small units.
A few are on their way to me now. The connector I am most hopeful about is this one:

When the goods arrive I will be sure to share my experience with the connector.
 

Apotessar

Cable Smoosher
Original poster
Aug 1, 2020
12
10
That is certainly the right direction. I found some others on Aliexpress that should also fit. A few of them were available in small units.
A few are on their way to me now. The connector I am most hopeful about is this one:

When the goods arrive I will be sure to share my experience with the connector.
I can confirm that the linked HY-4A and/or HY-4Y connectors fit the EVGA GPU fan connector. 👍
 
  • Like
Reactions: BaK