Giveaway - LINKUP Ultra PCIE4.0 Riser Cable (The True Gen4 Designed for Gen4))

Hi SFF members!

After extensive testing and development, we want to invite only registered SFF members to participate in the LINKUP PCIE4.0 Riser Giveaway.

By participating, you will have the chance to get a free LINKUP PCIE4.0 Riser Cable (+ free shipping).

We have limited stock dedicated to the giveaway, so participation will be on a first come, first serve basis and dependent on your system setup. Please see the attached file for the quantities allotted for different cases and configurations.

If you're interested, please apply by submitting the following form. If accepted, we will send you an enrollment package with instructions on moving forward. We look forward to hearing from you!

*Please note that this giveaway is not affiliated with SFF.Network or Minute Media in any way. It is solely a LINKUP endeavour.

Application form:

Microsoft Forms

forms.office.com

 

[LINKUP]

Please visit https://linkup.one/pcie-4-0-riser-cables-ultra/ for more details on our Ultra PCIe4.0, or to place an order.
Giveaway ongoing while supplies last. View "Quantites Allotted" attachment for details.

 

[ignsvn]

Oops sadly the case I use is not included in the list :'(

 

[LINKUP]

Oops sadly the case I use is not included in the list :'(

What case are you using? We may add it to the list.

 

[ignsvn]

What case are you using? We may add it to the list.

Thanks, appreciate the response.

https://smallformfactor.net/forum/threads/the-mi-6-microtower-case-performance-in-6-7l.1091/

It's the similar sandwich design like Dan A4.

 

[LINKUP]

Thanks, appreciate the response.

https://smallformfactor.net/forum/threads/the-mi-6-microtower-case-performance-in-6-7l.1091/

It's the similar sandwich design like Dan A4.

Don't know why Mi-6 isn't in the list. It was there originally. We will put it back in tomorrow. You can sign up any time. Thanks.

 

[LINKUP]

Giveaway Announcement: We've added a couple more cases on our approved list in response to messages we've been getting. Please let us know if you would like to enter, but your case is not on the list - we will happily review your brand/model. Here is the updated list to include MI-6, and NFC S4 mini:

 

[dKenGuru]

Hope, will win something)
Have two RX5500 XT and X570 itx Motherboard. My base riser cable (stock Sliger) not stable in PCI-E 4 mode.

 

[LINKUP]

Hope, will win something)
Have two RX5500 XT and X570 itx Motherboard. My base riser cable (stock Sliger) not stable in PCI-E 4 mode.

It's a giveaway. You will get it for free by testing this Ultra PCIE 4.0 cable and posting the result.
The ADT-Link riser isn't made for Gen 4. Like every riser cable, it runs Gen 3 with some performance drops when folded into Mini-ITX cases. Please let us know after you test our Ultra Gen 4 riser cable.

 

[dKenGuru]

Is 25cm riser will be in stock?

 

[LINKUP]

Is 25cm riser will be in stock?

Yes. Both straight and right angle versions are in stocks for North America and Europe.

 

[dKenGuru]

Sorry, I meant 25 right angle.

 

[LINKUP]

Sorry, I meant 25 right angle.

Yes. 25cm right angle is in stocks.

 

[dKenGuru]

On page https://linkup.one/linkup-ultra-pci...l-90-degree-socket-25-cm-3-0-gen3-compatible/ it is allow in add to wishlist.
I will measure my cable, maybe 20cm will enough.

 

[LINKUP]

On page https://linkup.one/linkup-ultra-pci...l-90-degree-socket-25-cm-3-0-gen3-compatible/ it is allow in add to wishlist.
I will measure my cable, maybe 20cm will enough.

Please try again. It's available now.

 

[dKenGuru]

Red covers on riser is flexible, did I can bend cable right after PCB plate or must bend after them?
It's important for Sliger cases compatibility

http://www.sliger.com/includes/products/sm/RX-RISER-SINGLE.JPG - stock riser.

 

[LINKUP]

Red covers on riser is flexible, did I can bend cable right after PCB plate or must bend after them?
It's important for Sliger cases compatibility

http://www.sliger.com/includes/products/sm/RX-RISER-SINGLE.JPG - stock riser.

You can bend it wherever you want. Here is video showing the cable is folded four times including one bend right on edge the PCB board's molding part.

 

[dKenGuru]

On video I don't see any possible bend red cover.

 

[LINKUP]

On video I don't see any possible bend red cover.

Sorry, I misunderstood your question. You can only bend after the red cover. The red cover is 8.5mm in width. Hope it fits your Sliger case.

 

[LINKUP]

Some members asked about the benchmark performance.
This is our first video shows 3DMark's PCIe Feature Test and Timespy's benchmark results.
Benchmark System
1. Gigabyte X570 Gaming X
2. AMD Ryzen 9 x3900
3. Sabrent 500GB Rocket Nvme PCIe 4.0 M.2 SSD
4. Sapphire Radeon RX 5700 XT
5. HyperX Predator Black 32GB kit 3600MHz DDR4
6. LINKUP Ultra PCIE 4.0 30cm Straight Riser Cable.