So I nabbed this G. Alantic case off ebay for $60 shipped, had seen their stuff online before but they have an MOQ I think of 10 cases on their website, seller had about that many(https://www.ebay.com/itm/G-ATLANTIC...Steel-NEW-IN-BOX-WITH-POWER-SUPP/264371522389). Ticked all the boxes for me at least and if the flex is too loud a Meanwell I have can easily go in for a nice iGPU brickless build
Manufacturer site http://www.g-alantic.com.tw/Product_Detail.aspx?no=GA6605
As delivered plus power cord and motherboard screws & feet. Case is all steel except for the aluminum faceplate that has a brush anodized finish. HDD, power, reset and button indicators(white) are etched in and painted.
Fan Side
PSU side
Back
Bottom came with VESA mount installed
Shot of the guts, SSD mount can only take 1, not using anything but M.2 not an issue. SSD mount has 3 positions.
Guts removed
Decent quality FlexPSU 180W total
Partially reassembled, not sure when build will happen likely will re-host my 3770K P8Z77i
Manufacturer site http://www.g-alantic.com.tw/Product_Detail.aspx?no=GA6605
As delivered plus power cord and motherboard screws & feet. Case is all steel except for the aluminum faceplate that has a brush anodized finish. HDD, power, reset and button indicators(white) are etched in and painted.
Fan Side
PSU side
Back
Bottom came with VESA mount installed
Shot of the guts, SSD mount can only take 1, not using anything but M.2 not an issue. SSD mount has 3 positions.
Guts removed
Decent quality FlexPSU 180W total
Partially reassembled, not sure when build will happen likely will re-host my 3770K P8Z77i
Last edited: