Log DAN H2O custom loop with 5900x&6900XT

m3lezZ

Cable Smoosher
Original poster
May 4, 2021
12
17
General
After a few months of housing my hardware in the SSUPD Meshlicious and having integrated a quite powerful custom loop, it was time for something new. Since the SSF case market is currently relatively stagnant in terms of new cases, my choice fell on the DAN H2O.



Because the case can only fit a single 240 rad, the challenge to use the possible space as effectively as possible and thus achieve the maximum cooling performance. Here I have resorted to a 30mm radiator from Alphacool in combination with the new BeQuiet Silient Wings 4 Pro. I have always had good experience with the fans from BeQuiet! and wanted to fully exploit the cooling performance with the max. speed of 3000/min.

In the course of time, I have come to an Optimus CPU cooler.



Benchmark and temperatures
I ran the system through the common benchmarks with an appropriate limit for the PBO and Undervolt on the GPU. The water temp did not exceed the 50°C mark during the entire test period.



Hardware
  • Ryzen 5900X
  • AMD 6900XT
  • ASUS – ROG B550-I-Strix
  • 32 GB Gskill@3800Mhz
  • Corsair SFX 750W
  • be quiet! SILENT WINGS PRO 4 120mm
  • Alphacool NexXxoS ST30 Full Copper 240mm Radiator V.2
  • Alphacool DC-LT 2
  • Alphacool Eisstation 40 DC-LT
 
  • Like
Reactions: rfarmer

Hmfazevedo

What's an ITX?
New User
Mar 14, 2022
1
1
Nice build ! I reach 47c coolant with the same case and only my 5950x with a 30mm rad, so 50c with the 6900XT is great !
 
  • Like
Reactions: m3lezZ