Cerberus-X, Custom Water Cooling, ASRock Taichi Ultimate, Intel 9900k

carpenike

Caliper Novice
Original poster
Oct 27, 2018
30
33
So this was my first attempt at water cooling and also my first attempt with an SFF case. I used the Cerberus-X (http://www.sliger.com/products/cases/cerberus_x/) from Sliger. Special thanks to @MarcParis and @fabio on the Cerberus thread!

Most of the parts are listed below. I ended up using all fittings rather than tubing... Got a little carried away with elbows and ended up with very short runs in this case.

Cooling pieces were Heatkiller IV CPU block, EVGA HydroCopper, Heatkiller Pump/Res (custom cut down to fit case), 2x 240mm HWLabs GTS xFLOW Radiators, and 4x Noctua NF A12x25 fans. Controlling it with an aquaero LT6.

PCPartPicker part list

CPU: Intel - Core i9-9900K 3.6 GHz 8-Core Processor
Motherboard: ASRock - Z390 Taichi Ultimate ATX LGA1151 Motherboard
Memory: G.Skill - Trident Z 32 GB (2 x 16 GB) DDR4-3200 Memory
Storage: Samsung - 950 PRO 512 GB M.2-2280 Solid State Drive
Video Card: EVGA - GeForce GTX 1080 Ti 11 GB SC2 Video Card
Power Supply: Silverstone - SFX 800 W 80+ Titanium Certified Fully-Modular SFX Power Supply
Operating System: Microsoft - Windows 10 Pro OEM 64-bit

Album with comments per picture below: