1. billabong2606

    Log SG13 Front PSU + GPU Deshroud Mod (Cross Post from Reddit)

    Hello everyone! I recently made a post of my SG13 build in reddit here. Hope my build log/guide could be of help to anyone looking to build in this case!
  2. S

    Advice SG-13 cooling questions

    Hello everyone. Recently I pieced together a new PC to be my Daily Driver, toy, and workstation in preparation for the new Zen3 CPUs and Next Gen graphics cards. The machine was built in an SG13 with: 2X16 Samsung B-Die overclocked to DDR4-3733 16-16-16-34...
  3. freckerbium

    I revised my SG-13 based on some feedback here. Take a look?

    I'm wondering if there are better (i.e. faster / quieter) options for fans out there that maybe I'm not aware of? I did my best to compare. Open to any suggestions about anything, not just fans :p This was my first post (everyone was super helpful)...
  4. freckerbium

    My Proposed SG13 Build. Open to suggestions

    Hey everyone! First post here. I posted over at /r/SFFPC and /r/BuildAPC earlier in the week and then I found out this place existed! So I am sharing my proposed build with you in hopes you: Identify any potential areas I can increase value / get something better for cheaper (which I know...
  5. Z

    Sugo SG13 for 1080p gaming and work

    First off, the hardware that was used in that build: - SilverStone Sugo SG13B - Asus ROG Strix B450-I Gaming - AMD Ryzen 5 2600X + Enermax LiqMax III 120mm + BeQuiet SilentWings 3 120mm PWM High Speed + Noctua NT-H2 - Sapphire Radeon RX 590 Nitro+ "OC" 8GB - Corsair Vengeance LPX 32GB (2x16GB)...
  6. E

    Sliger SM550 (Tron)

    This is my 3rd SFF build. Comparing the size of SM550 with the famous budget SFF Silverstone SG13 and a little premium Kolink Rocket Image1 Image2 The build (with Corsair SP120) Image1 Image2 Image3 Night/Dark Image1 More RGB Image1 Image2 Image3 Video Link i7-8700 Noctua NH-L9i Gigabyte...
  7. F

    SG13 VRM Cooling Options

    Hey guys, I crammed a ton of stuff into my SG13 and it's resulted in extremely hot VRM temperatures. I have a full ATX PSU, Reference Sapphire Vega 64, a H60, and two sticks of ram which are blocking almost all airflow from the front fan on the radiator. Also I was silly and went with the solid...
  8. Veryaton

    Concept Is it feasible to use the PSU as the only air exhaust in a closed case?

    I don't know if this is crazy or not, or something possible. I want to make a powerful SFF with an cpu i9 8 gen (9700-9900K), using a Sugo SG13 box. The problem with this case is that it has no rear exhaust, and I've seen in another forum that a guy used the PSU as a rear exhaust, as you can...
  9. PunchyFisty

    AIO cooler dimensions in Sugo SG13

    Hello there, I just joined the community today after spectating for quite a while. I have a general fit question for AIO CPU coolers in the Silverstone Sugo SG13 WB-Q. Has anyone attempted putting the NZXT Kraken X42 or the Deepcool CAPTAIN 120EX in this case? My concerns are- - NZXT 140mm...
  10. S

    SG13 - a slim 2.5'' HDD with an ATX PSU (will it fit?)

    Hello guys. I have a SG13 build with a fairly long 165mm ATX PSU (thus no drive bracket).So far it's only had a single PciE M2 1TB SSD drive. However, since that drive is getting wasted on rarely accessed files and using external drives is bothersome, I was thinking about fitting a HDD into the...
  11. wooble

    SG13 tinytower mod

    Hello! Hopefully this is right category for this! I love small tower cases, but I could not find anything which fits my needs and budget so I decided to mod one from SG13. I also wanted to fit beefiest air-cooler possible in small case. It has been long process of trial and error, but I...

    SG13P +1080ti + 7700k + 2xAIOs + 2xfans

    Hey everyone! Been lurking the site for a while now, and building SFF for several years. Just put together a gaming machine for my girlfriend's birthday and wanted to share it with you fine folks. After checking out the many gorgeous nano sized builds and custom mods you're all posting, my sg13...
  13. I

    Enclosure Budget SFF Build - Jonsbo C2 vs. SG13, or Chinese?

    Hello SFF Community. Title. Interested in building a budget ITX desktop (Around $1,000). I've been looking at the Jonsbo C2 and the SG13 and having a hard time deciding between both. Also saw a post about Chinese cases but I don't have that much information on Taobao. Thanks!